Sony HDR-CXSOO Operating Manual page 8

On recording
• Before starting to record, test the recording
function to make sure the image and sound are
recorded without any problems.
• Compensation for the contents of recordings
cannot be provided, even if recording or
playback is not possible due to a malfunction of
Note on the camcorder/battery pack
temperature
• When the temperature of the camcorder
or battery pack becomes extremely high or
extremely low, you may not be able to record
or play back on the camcorder, due to the
protection features of the camcorder being
activated in such situations. In this case, an
indicator appears on the LCD screen (p. 58).
• Do not apply shock or vibration to the
camcorder. The camcorder may not be able to
record or play movies and photos.
• When connecting the camcorder to another
device with communication cables, be sure to
insert the connector plug in the correct way.
Pushing the plug forcibly into the terminal
will damage the terminal and may result in a
malfunction of the camcorder.
• Even if the camcorder is turned off, the GPS
function is working as long as the GPS switch
is set to ON. Make sure that the GPS switch is
set to OFF during take off and landing of an
airplane (HDR-CX500V/CX520V).
• If you repeat recording/deleting images for
a long time, fragmentation of data occurs on
the recording media. Images cannot be saved
or recorded. In such a case, save your images
on some type of external media first, and then
perform [MEDIA FORMAT] (p.45).
• The LCD screen is manufactured using
extremely high-precision technology, so over
99.99% of the pixels are operational for effective
use. However, there may be some tiny black
points and/or bright points (white, red, blue,
or green in color) that appear constantly on the
LCD screen. These points are normal results of
the manufacturing process and do not affect the
recording in any way.
Using the camcorder
• The camcorder is not dustproofed, dripproofed
or waterproofed. See "Precautions" (p. 59).
• Do not do any of the following when the
It:I
(Movie)/O (Photo) lamps (p. 15) or the access
lamp (p. 48) are lit or flashing. Otherwise, the
recording media may be damaged, recorded
images may be lost or other malfunctions could
occur.
- ejecting the "Memory Stick PRO Duo" media
- removing the battery pack or AC Adaptor
from the camcorder
- Applying mechanical shock or vibration to
the camcorder
• See page 47 for the "Memory Stick" media you
can use with this camcorder.
o
Rechargeable battery pack NP-FH60 (1)
o
CD- ROM "Handycam" Application
Software (1) (p. 28)
- "PMB" (software, including "PMB Guide")
- "Handycam" Handbook (PDF)
o
"Operating Guide" (This manual) (1)
[AI
~
[g
t:;~e'=
quantity.
o
AC Adaptor (1)
o
Power cord (Mains lead) (1)
o
Component A/V cable (1)
[AI
o
A/V connecting cable (1)
~
o
USB cable (1)
[Q]
o
Wireless Remote Commander (1)
A button-type lithium battery is already
installed. Remove the insulation sheet before
using the Wireless Remote Commander.
Insulation sheet
I
us
8