The Accupoint - Toshiba Portégé 650CT User Manual

322
If Something Goes Wrong
Fixing Device Related Problems
You've connected an external keyboard and Windows 95 displays
one or more keyboard error messages.
The keyboard you connected may be incompatible with the com-
puter. Try using a different make of keyboard.
You are using an external keyboard and the
don't work.
Make sure the external keyboard's
combination you are using.
Nothing happens when you press the keys on the external
keyboard.
Make sure the PS/2 keyboard is plugged into the PS/2 port.
You may have plugged the external PS/2 keyboard in while the
computer was turned on. Press
ton to restart the computer so it recognizes the device.
The keyboard locks and the computer will not start.
Make sure the power is on and press the reset button.

The AccuPoint

Some of the keyboard conditions listed above may also affect the
AccuPoint. In addition, consider the following:
Your finger easily slides off the AccuPoint button.
The AccuPoint cap may be oily. Remove the cap and clean it with
a cotton swab dipped in rubbing alcohol.
Or the cap may have become worn. Replace the cap with one of
the spares that come with your computer. Follow these steps:
1 Remove the AccuPoint cap by grasping it firmly and
pulling straight up.
The AccuPoint spindle is now visible.
2 Position the new cap on the spindle and press it down into
place.
Part I: Getting To Know Your Computer
key combinations
Fn
key equivalent is set to the
Fn
+ + or press the reset but-
Ctrl Alt Del