Related Manuals for Nemo Andi 2 Person
Summary of Contents for Nemo Andi 2 Person
- Page 2 And finding the right path is only the first challenge, walking that path is the real test. NEMO has been making strides to use more sustainable materials, to repurpose byproducts of manufacturing, and to recycle products at the end of their useful life.
- Page 3 1. Integrated Vestibule 6. Multiple Guy-Out Points 2. Door Tie-Backs 7. Corner Anchor 3. UVX Window 8. Shell-Tensioning Tub 4. Light Pocket™ 9. Pole Sleeve 5. Internally Deployable Vent 10. Large Mesh Door 83" 42" 50" 93" 59" Capacity: Minimum Weight: 3.9 lbs (1.8 kg) Packed Weight: 4.4 lbs (2.0 kg) Packed Dimensions: 10" × 7.5" dia. (25 × 19 cm) Frame: 2 DAC 9 / 9.6 mm Featherlite® NSL Poles Shell Fabric: 40D OSMO™ W/B Vestibule Fabric: 20D PU Nylon Floor Fabric: 30D PU Nylon Floor Dimensions: 93" × 59" (236 × 150 cm) Interior Height:...
-
Page 4: Optional Accessories
Optional Accessories 1. Footprint: The Footprint is a 70D abrasion- resistant nylon fabric ground sheet perfectly sized to fit underneath your tent. The fabric is PU coated for waterproofness (10,000 mm). The Footprint reduces wear and tear on your tent floor from contact with the ground. 2. Pawprint™: The Pawprint™ is a removable liner perfectly sized to fit inside your tent. It has the dual function of protecting your tent floor from boots and paws, and of adding serious comfort. The Pawprint™ is made of a machine-washable brushed polyester that is very soft to the touch. Place your sleeping pads between the Pawprint™ and floor to help them stay in place. With a clean, soft Pawprint™ under you, you might be able to save some weight and travel with a lighter sleeping bag or blanket. 3. WindShield™: The WindShield™ is a fitted curtain made of 70D nylon ripstop which attaches in front of the mesh main entry to seal out wind and snow. A vertical zipper allows you to pass easily through the WindShield™ without affecting the use of the main door. There are also cordlock style tie-backs to hold the WindShield™ out of the way if you’re sitting in the doorway. - Page 5 ANDI ™ Ultralight Backpacking Andi™ is a streamlined, highly efficient tool for backcountry exploration. Descended from the Nano™ line of tents, Andi™ shares a similar layout to its predecessor, but has an improved setup method and an additional six inches of length. The DAC aluminum poles are inserted into dead-end sleeves from the outside front of the tent, a system that could hardly be simpler. This unique setup coupled with Andi’s™ freestanding design, integrated vestibule, and new 2010 OSMO™ w/b fabric makes Andi™ a charming and dependable companion for adventure. The bold catenary curves at the base of the tent reduce wasted fabric and increase tension in the tent walls, helping with wind resistance and water shedding. An optional removable WindShield™ curtain adds all-conditions versatility when you want it, saving weight and increasing ventilation when you don’t. Includes GREEN™ anodized DAC Featherlite® NSL poles, watertight stuff sack, stakes, and repair kit. Optional Footprint, and Pawprint™, and WindShield™ are available. ANDI™ Innovations 1. Dead End Pole Sleeves: The setup of Andi™ is very fast and simple thanks to pole sleeves which begin at the front of the tent and “dead end” at the rear. You simply slide the poles into the sleeves until they stop and then secure the pole end tip in the grommet near the sleeve opening at the front of the tent. There are multiple grommets to allow for changes in the fabric tension due to humidity. 2. Catenary Cuts: Using computer-aided modeling, we built catenary curves into the edges of Andi’s™ tent panels. This method of patterning saves extra material and improves the tensioning of the tent.
- Page 6 3. UVX Window: The vestibule includes a UVX window so you can check conditions outside without exposing your gear to the elements. The window is optically clear, non-yellowing, non-clouding, UV resistant, and remains flexible in cold temperatures. 4. Integrated Vestibule: The theme of Andi™ is efficiency: saving weight, saving waste and maximizing functionality. By integrating the vestibule into the tent shell, we saved the need for additional zippers and hardware, and saved you the hassle of attaching a separate fly. If the weather turns sour, it only takes a few seconds to deploy the vestibule and create an additional 8 square feet of covered shelter. 5. Rear Venting: A large overhead vent opposite the door promotes good air circulation. An internal strut keeps the vent properly tensioned and allows the vent to be deployed from inside. 6. Light Pocket: Andi™ includes a special pocket for your headlamp with a light diffusing fabric. Place your lamp in the pocket above the door with the light facing towards the inside of the tent, and the Light Pocket™ will help cast an even glow throughout the tent interior.
- Page 7 NEMO Customer Service at 1 - 800 - 997 - 9301. We will do our best to see that you are satisfied with your NEMO product. Our goal is to get you back in the outdoors as quickly as we can.
- Page 8 Death by suffocation is possible. loss or injury. If you have additional questions, please contact NEMO Equipment, Inc. directly at 800-997-9301. NOTE: All 2010 NEMO tents meet the CPAI-84 standard for flame retardancy. Printed on Recycled Paper www.nemoequipment.com ©2010 NEMO Equipment, Inc.
- Page 9 To contact NEMO Customer Service INSTRUCTIONS FOR SETUP Email: journey@nemoequipment.com Phone: 800-997-9301 Insert Poles To install Andi™ poles, slide the pole through the sleeve located near the door until the pole dead ends at the opposite corner. Repeat with the second pole.