Panasonic CF-19 Operating Instructions Manual page 22

Troubleshooting (Basic)
n Touch Pad / Touchscreen (only for model with touchscreen)/Dual Touch (only for model with dual touch)
The pointer does not work.
Cannot input using the touch
pad.
<Only for model with touch-
screen>
Cannot input using the
touchscreen.
Cannot point the correct
position using the included
stylus/digitizer pen.
"Charm" does not always
appear by finger operation.
n On-screen Document
The document of PDF for-
mat is not displayed.
n Others
No response.
22
l When using the external mouse, connect it correctly.
l Restart the computer using the keyboard.
l If the computer does not respond to keyboard commands, read "No response"
(è below).
l Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
l The drivers for some mice may disable the touch pad. Check your mouse's operating
instructions.
l Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the Setup Util-
ity.
l Set [Touchscreen] to [Enabled] in the [Advanced] menu of the Setup Utility.
<Only for model with touchscreen>
l Perform the touchscreen calibration (è
tion").
l Use the included stylus.
<Only for model with dual touch>
l Perform the digitizer calibration and Touchscreen calibration (è
"Screen Input Operation"). Use the digitizer pen perpendicularly to the screen.
l Use the included digitizer pen.
l On the Windows logon screen or the Welcome screen, you may not be able to point the
correct position using the included digitizer pen. Use the keyboard or the touch pad to
sign in /
l Flick toward the center of the screen from the right edge or press and hold
button.
l Use the included pen.
l Install Adobe Reader.
A Log on to Windows as an administrator.
B Click (Start) and input "c:\util\reader\en\Pinstall.bat" in [Search programs and files]
then press Enter .
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates...].
Ctrl + Shift + Esc to open Task Manager and close the software application
l Press
that is not responding.
l An input screen (e.g., password input screen at startup) may be hidden behind another
Alt + Tab to check.
window. Press
l Slide the power switch for four seconds or longer to shut down the computer, and then
slide the power switch to turn it on. If the application program does not work normally,
uninstall and reinstall the program. To uninstall,
A Open the Control Panel.
1. Perform either of the following procedures.
Ÿ Right-click
Ÿ Click on the Start screen.
2. Click [Control Panel].
Click (Start) - [Control Panel].
B Click [Program] - [Uninstall a program].
Reference Manual "Screen Input Opera-
log on.
at the bottom left corner of the Desktop screen.
Reference Manual
(Enter)