Selecting The Colour System In Av Mode; Connecting To The Monitor Output Jacks; Av Connection To The Aerial Socket - Sanyo CP14G1(C) Instruction Manual

Selecting the Colour System in AV Mode

Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follows;
AV
AUTO
Colour system setting for AV position is automatically stored in the memory.

Connecting to the Monitor Output Jacks

Note: Model CA14G1C, CP14SA1
only.
The picture signal being displayed on the TV screen is output through the Monitor Output Jacks. Use
these terminals to record TV broadcasts and for video dubbing from AV input terminals.
INPUT OUTPUT
A
U
D
I
O
V
I
D
E
O
To record TV programme, select TV mode
by pressing the TV/AV Selector and
record the desired programme.

AV Connection to the Aerial Socket

The AV apparatus can also be connected to the aerial socket of your TV receiver.
Presetting to watch the video input
1. Playback the VCR .
2. Tune a VCR playback in programme position that you want. (See Semi-Auto Tuning and Manual Tuning
on pages 11.)
Aerial Socket
ANT.75Ω
For further details concerning this connection and adjustment, refer to the operating instructions
for the AV equipment.
AV
PAL
CP14SR1
(C),
Recording TV broadcasts or tape dubbing
TV mode
15
PLAYBACK
VCR for playback
Connecting other Equipment
AV
NTSC4.43
CP20SR1 CP21SA1
(C), (C),
To video and audio inputs
To dub video from the AV terminal input, select AV
position by pressing the TV/AV Selector.
AV
NTSC
CA21G1C, CA21SA1C
(C),
VCR for recording
AV
15