Using The Timer Menu - Sony Trinitron KV-32XBR48 Operating Instructions Manual

Using the TIMER Menu

TIMER
DAYLIGHT SAVING : YES
CURRENT TIME SET
ON / OFF TIMER
CHANNEL BLOCK
MENU
– – : –AM –
– – –
Use Exit MENU
After setting the clock you can use the timer to
turn the TV on and off.
For detailed information on using the remote
control to modify menu settings, refer to
"Learning Menu Selection" on page 22.
To select the TIMER
/
Display Highlight
MENU
Tip z
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
DAYLIGHT
SAVING
Automatically adjusts
the time.
CURRENT
TIME SET
Necessary for the
TIMER.
ON/OFF TIMER
Wake up or
scheduled viewing.
menu:
/
Select
CHANNEL
BLOCK
Prevent access
to certain channels.
Spring: Select YES to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select NO at the end of Daylight Saving Time.
The current time moves back one hour.
1 Press , then press up or down on the joystick until
the current day (MON-SUN) is displayed, and press
2 Press up or down on the joystick until the current hour
(01-12) and AM/PM is displayed, and press
3 Press up or down on the joystick until the current
minute (00-59) is displayed, and press
The Clock has now started. Press MENU to exit.
1 Select the desired timer (1 or 2).
2 Press up or down on the joystick until the desired day
(MON-SUN) or range of days (EVERY SUN-SAT or
EVERY MON-FRI) is displayed, and press
3 Press up or down on the joystick until the time (hours and
minutes) that you want the TV to remain on is displayed, and then press
4 Press up or down on the joystick to set the time duration (maximum of 6 hours)
and press . TO CANCEL THE TIMER FUNCTION, PRESS RESET.
5 Press up or down on the joystick to select the desired channel and press
The timer is now set. The TIMER indicator on your TV will be lit.
Press MENU to exit. Performing AUTO PROGRAM will erase all TIMER settings.
You will be able to block two channels for a period of up to 12 hours.
FOLLOW STEPS 1-5 OF "ON/OFF TIMER" ABOVE
To erase your CHANNEL BLOCK settings, press RESET
while in the CHANNEL BLOCK window. Performing AUTO
PROGRAM will erase your CHANNEL BLOCK settings.
CURRENT TIME SET
– – – – – : – – AM
MENU
.
.
Use
.
ON / OFF TIMER
1.
– – – –
– – : – – AM – h CH – – –
2.
– – – –
– – : – – AM – h CH – – –
MENU
.
Select a Program
SUN 1 2 : 0AM
Use
CHANNEL BLOCK
1.
– – – – – –
– – : – – AM – h CH – – –
2.
– – – – – –
– – : – – AM – h CH – – –
MENU
Select a Program
SUN
Use
Exit
MENU
0
Exit
MENU
.
.
1 2 : 0AM 0
Exit
MENU
25