Panasonic FP-7718 Service Manual page 36

2) Input Check For FP-7728/7735
Code Function
No.
06 a) Toner level detection
b) Copier paper exit sensor
c) Total counter
d) Key counter
15 a) Waste toner bottle full sensor
b) Toner bottle position sensor
20 For FA-S615
a) Bin lower limit switch
b) Bin cam home position sensor
c) Tamper home position sensor
d) Transfer motor clock sensor
21 For FA-S615
a) Bin paper detecting sensor
b) Paper detection sensor for JAM
C) Stapler detection sensor
22 For FA-S680
a) Sorter interlock switch
b) Paper transport cover open/close Cover opened.
For FA-S280
a) Sorter interlock switch
23 For FA-S680
a) Bin home position switch
b) Bin cam switch
c) Tamper home position
sensor
For FA-S280
a) Sorter cam sensor
b) Sorter bin position sensor
5-2
Condition
Toner is empty
Paper is not detected.
Total counter is not connected.
Key counter is not installed.
Toner is full
When the toner bottle is in the
home position
Bin is placed less than lower
limit.
Cam in home position.
Bar in home position.
Clock signal is detected.
Paper is not detected.
Paper is not detected.
Stapler is not installed.
Sorter is installed.
Sorter is pulled out
Bin in home position
Bin cam in home postion
Tamper in home position
Sorter cam in home position
Sorter bin in home position
Message display
7 6 5 4 3 2 1 0
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑
↑