Parts And Components - Lennox Hearth Products ME43 Install And Operation Instructions

Elite series 43" wood burning fireplaces
Table of Contents

Advertisement

Description
Outside Air Kit (Required - included with fireplace)
Outside Air Coupler to connect outside air UZI to fireplace,
UZIAD
Outside Air Ducting - includes 4" insulated flex x 10' long,
UZI
Trim Kit - Gold
Trim Kit - Brushed Nickel
Door Capping - Gold
Door Capping - Brushed Nickel
Blower
Blower motor speed control
Fireplace Model ME43 - Approved Venting Components
- 8" diameter chimney - Model ASHT+, S-2100+, HT6000+, HT6103+
or AC manufactured by Security Chimneys International only.
Notes:
(P rojet NovaTemp ) HT6000+ is equivalent to S-2100+
1.
TM
(Projet NovaTemp ) HT6103+ is equivalent to ASHT+
2.
TM
3.
This appliance is equiped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for that chimney will be required.
4.
Chimney Adaptor (S-2100+ / HT6000+) for CANADA ONLY - If you want to
install a S-2100+ / HT6000+ chimney, an adaptor is available (8UCA).
5.
AC Chimney is Not recommended at elevations above 4000 feet or
in cold climates where temperatures are likely to fall below 32° F (0° C).
W hen using AC chimney, an AC8SB starter section must be used
before installing an elbow. W hen an offset is needed imm ediately off the
top of the fireplace, a starter section (AC8SB30) is available.
20
Installation Accessories
Fireplace Options
ME43 COMPONENTS LISTS
Cat./ Part No.
Starter Kit: For wall or furnace installations. Includes
blower (BISZY), flex adaptor and two clamps (BISAF),
blower variable speed control (VRUW), thermo disc (VTU),
blower flex adaptor (BISAVF), and back draft damper
(BISBD)
UZIDF
UZI
Flex 5 inches ID x 15 feet Long
Flex 5 inches ID x 25 feet Long
H3426
Blower flex adaptor, includes damper (BISBD)
H3395
Blower - 2 50 CFM
H3393
Flex adaptor and two clamps for fireplace connection
Blower motor speed control
H3394
Thermo disc - turns motor on when fireplace hot and off
UZY5
when cool
Back draft damper - prevents air blowing from furnace into
VRUW
fireplace
Heating/Cooling thermostat - 110 volt
Forced Air Heating Kit
Flex - choose 15 feet or 25 feet depending on installation
Starter Kit Separate Components
Options
BISFWK-1
5FLEX15
5FLEX25
BISAVF
BISZY
BISAF
VRUW
VTU
BISBD
HCTW

Advertisement

Table of Contents
loading

This manual is also suitable for:

Me43bk sp

Table of Contents