Data Cable - Nokia E5-00 User Manual

the other device. When pairing, use a
16-digit passcode, and set the other
device as authorised.
To use the remote SIM mode with a
compatible car kit enhancement,
activate Bluetooth connectivity, and
enable the use of the remote SIM mode
with your device.
Activate the remote SIM mode from the
other device.
When the remote SIM mode is on in your
device, Remote SIM mode
in the standby mode. The connection to
the wireless network is turned off, as
indicated by in the signal strength
indicator area, and you cannot use SIM
card services or features requiring
cellular network coverage.
When the wireless device is in the
remote SIM mode, you can only use a
compatible connected enhancement,
such as a car kit, to make or receive calls.
Your wireless device will not make any
calls while in this mode, except to the
emergency numbers programmed into
your device. To make calls from your
device, you must leave the remote SIM
© 2010 Nokia. All rights reserved.
mode. If the device is locked, enter the
lock code to unlock it.
To leave the remote SIM mode, press the
power key, and select
mode.

Data cable

To avoid corrupting data, do not
disconnect the USB data cable during
data transfer.
Transfer data between your device
and a PC
is displayed
1
2
3
Insert a memory card in your device,
and connect the device to a
compatible PC with the data cable.
When the device asks which mode
to use, select Mass
mode, you can see your device as a
removable hard drive in your
computer.
End the connection from the
computer (from the Unplug or Eject
Hardware wizard in Microsoft
Windows, for example) to avoid
damaging the memory card.
Connectivity
Exit remote SIM
storage. In this
81