Yaesu FTDX9000D Operation Manual page 111

Hide thumbs Also See for FTDX9000D:
Table of Contents

Advertisement

Text Message Programming
1. Press the CW Mode key to set the operating mode
to CW.
2. Be sure that Break-in is Off by pressing the BK-IN/
SPOT key, if necessary.
3. Press the FH-2's MEM key.
ON
4. Press the FH-2's 1 ~ 5 key to select the desired
Message Memory Register into which you wish to pro-
gram the text.
ON
5. Use the FH-2's
amd
position and use the
the letter/number to be programmed in each slot of
the memory. In the case of the second example above,
the "}" character designates the slot where the Con-
test Number will appear.
Advice
You may also use the Main Tuning Dial and the CLAR/VFO-B
knobs to program the message characters.
ON
6. Press the FH-2's MEM key again once all charac-
ters have been programmed.
FT
9000D O
DX
PERATION
CW C
C
ONTEST
LOCK
OFF
LOCK
OFF
keys to set the cursor
and
keys to choose
LOCK
OFF
M
ANUAL
ONVENIENCE
M
K
EMORY
EYER
Checking the CW Memory Contents
1. Be sure that Break-in is still turned Off.
2. Press the FH-2's 1 ~ 5 key to check your work.
You will hear the results in the sidetone, but no RF
energy will be transmitted.
On-The-Air CW Message Playback
1. Press the BK-IN/SPOT key to enable transmission.
Either Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item MODE-CW 047 CW
BK-IN.
2. Press the FH-2's 1 ~ 5 key to transmit the pro-
grammed message.
Note
If you subsequently decide to use the "MESSAGE" technique for
memory storage, please note that the contents of a message stored
using text input will not be transferred over when you select "MES-
SAGE" on a particular memory register.
Correcting/Editing Previously-Stored
Characters
Use the Main tuning dial to select the letter/number to be cor-
rected, then rotate the CLAR/VFO-B knob to choose the re-
vised letter/number top be utilized in this slot.
Deleting Previously-stored Characters
Use the Main tuning knob to select the last correct letter in the
message. Now rotate the CLAR/VFO-B knob to select the " }
" character; everything after the " } " character will be deleted.
F
EATURES
LOCK
ON
OFF
LOCK
ON
OFF
Page 109

Advertisement

Table of Contents
loading

Table of Contents