JVC AV-29WX14/G Service Manual page 32

STATIC CONVERGENCE ADJUSTMENT
(1) Input a crosshatch signal.
(2) Using 4-pole convergence magnets, overlap the red and
blue lines in the centre of the screen (Fig. 4) and turn them
to magenta (red/blue).
(3) Using 6-pole convergence magnets, overlap the
magenta(red/blue) and green lines in the centre of the screen
and turn them to white.
(4) Repeat (2) and (3) above, and make the best convergence.
DYNAMIC CONVERGENCE ADJUSTMENT
(1) Move the deflection yoke up and down and overlap the lines
in the periphery. (Fig. 5)
(2) Move the deflection yoke from the left to the right and overlap
the lines in the periphery. (Fig. 6)
(3) Repeat (1) and (2) above, and make the best convergence.
(4) Adjust XV by XV coil. (Fig.7)
NOTES:
•
After the adjustment, fix the wedge at the original position.
•
Fasten the retainer screw of the deflection yoke.
•
Fix the P/C magnets with glue.
1-32 (No. YA104)
(FRONT VIEW)
(FRONT VIEW)
RED GREEN
RED
GREEN
BLUE
BLUE
GREEN
(FRONT VIEW)
GREEN
RED
BLUE
(FRONT VIEW)
BLUE
RED
GREEN
BLUE
RED
GREEN
RED
BLUE
RED
GREEN
BLUE
BLUE
GREEN
RED
GREEN