Miele PT 5135 C OS Operating And Installation Instructions page 32

Problem solving guide
Problem
The programme
does not start and
the display is dark.
The interior drum
lighting does not
come on.
The display is in a
different language.
The Start button
light will flash when
a programme is
being selected.
The display is dark
and the light ring
around the
multi-function
selector is not lit up.
The Start button
light flashes slowly.
32
Possible cause
No obvious cause.
The lighting switches off
automatically (to save
energy).
The lamp needs
changing.
A different language has
been selected in "Settings
J" "Language J".
This is not a fault.
The flashing indicates
that a programme can be
started.
The display has switched
off automatically to save
energy (Standby mode).
The same applies to the
programme selector.
The programme selector
light goes out when the
Settings menu has been
selected.
If the problem persists,
there is a fault.
Remedy
– Is the dryer switched on?
– Is the door closed properly?
– Has the fuse or circuit
breaker tripped?
It will switch on again after the
door has been closed and
then opened.
Change the lamp as
described at the end of this
section.
Set the language you want.
The flag symbol will guide
you.
After the programme has
started, the flashing will
change to a constant light.
The display and programme
selector are lit up after
pressing a button or turning
the programme selector.
The programme selector light
comes on when a programme
is selected.
Contact the Miele Service
Department.