Sony BRAVIA KDL-48R55xC Operating Instructions Manual page 20

Equaliser
Adjusts sound frequency settings.
Clear Voice
Makes voices sound clearer.
Auto Volume
Minimizes the difference in volume level
between all programmes and adverts (e.g.
adverts tend to be louder than
programmes).
Balance
Emphasises left or right speaker balance.
Volume Offset
Adjusts the volume level of the current
input relative to other inputs.
Dual Sound
Sets the sound from the speaker to
[Mono], [Stereo], [A] or [B].
Note
• If the signal is very weak, the sound becomes
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound
becomes monaural, but the noise is reduced.
• The [Dual Sound] setting is memorized for
each programme position.
• You cannot listen to stereo broadcast sound
when [Mono] is selected.
Hint
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [A] or [B].
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
• The effect may not function or may vary
depending on the programme regardless of
the [Dynamic Range] setting.
HE-AAC Audio Level: Adjust the HE-
AAC audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
20
GB
Screen
Screen Format
For details about wide mode, see page 13.
Auto Format
Automatically changes [Screen Format] to
match the input signal.
To keep your setting, set [Off].
Hint
• Even if [Auto Format] is set to [On] or [Off], you
can always modify the format of the screen by
pressing repeatedly.
4:3 Default
Sets the default [Screen Format] for a 4:3
input signal.
Auto Display Area
Automatically adjusts the picture to the
most appropriate display area.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjust the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
Vertical Size
Adjusts the vertical size of the picture
when [Screen Format] is set to [Wide
Zoom].
PC Adjustment
Selects screen mode or adjust the display
position of the picture when receiving PC
input signal.