Using Sleep Timer; Timer Priority - JVC MX-G50 Instructions For Use Manual

4
Set the on-time you want the unit
to turn on.
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
"OFF TIME" appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the
unit to turn off (on standby).
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press 4 or ¢ to select the band
("TUNER FM" or "TUNER AM"),
then press SET.
2) Press 4 or ¢ to select a preset
channel number, then press SET.
The REC (recording timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence for your confirmation.
7
Press
turn off the unit (on standby) if
necessary.
If you want to listen to another source while recording
Press REC START/STOP to stop recording. Without stopping it, you
cannot change the source.
To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly until
"REC" appears on the display.
2 To turn off the Recording Timer, press
CANCEL.
The REC (recording timer) indicator goes off
from the display ("OFF" appears for a while).
The Recording Timer is canceled, but the
setting for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your
confirmation.
Downloaded From Disc-Player.com JVC Manuals
STANDBY/ON to
STANDBY

Using Sleep Timer

PRESET
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
SET
length passes.
On the remote control ONLY:
1
PRESET Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
SET
SLEEP10
OFF
(Canceled)
2
Wait for about 5 seconds after specifying the
PRESET
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
SET
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also canceled when you turn off the unit.
STANDBY/ON

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
• Recording Timer has priority over Daily Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
CLOCK
/ TIMER
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
CANCEL
/DEMO
time has priority.
Sleep Timer
Recording Timer
SET
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
SLEEP20 SLEEP30 SLEEP60
SLEEP120 SLEEP90
6:30 7:30
AM 6:00 7:00
canceled.
SLEEP