Section 4 - Configuration
Once cameras have been set up, a highly configurable scheduling system allows for continuous recording or recording during specifically
allotted time frames. Each camera can be set to record independently at preset intervals. It also provides event recording based on specific
triggers. The NVR also can be configured to overwrite the oldest data automatically when Hard Disk space runs out, allowing for continuous and
uninterrupted recording. You can specify the number of days the recording should be kept (within the limits of the Hard Disk capacity).
Set Recording Mode
Enable
Record according to a schedule.
Schedule
Recording:
Enable
Select this option to automatically empty disk space when the disk
Automatic
space is full. This will overwrite the earliest recorded video with the
Overwrite:
latest video one day at a time.
Enable Audio
Set the duration to store recorded video clips. After the duration, the
Record:
clips will be purged.
Set Recording Schedule
Always
Click this button to enable always on recording for all IP cameras.
Record:
Add/Edit
Select a camera from the camera list, and click Add/Edit Schedule to
Schedule:
create a new schedule for the selected camera.
Delete
Select a camera from the camera list, and click Delete Schedule to
Schedule:
delete the schedule for the selected camera.
Copy
Select a camera from the camera list, and click Copy Schedule to
Schedule:
create a duplicate schedule.
D-Link DNR-312L User Manual
Schedule
Recording Schedule
50