Sony SA-D10 Operating Instructions

4-528-111-11(1)
Multimedia Speaker System
Operating Instructions
©2014 Sony Corporation Printed in China
SA-D100
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such as vases, on the appliance.
To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers,
tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example,
lighted candles).
As the main plug is used to disconnect the unit from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from
the AC outlet immediately.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine
and fire.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the
unit itself has been turned off.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union
and other European countries with separate collection systems)
License and Trademark Notice
ˎ MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.
ˎ
ˎ Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States
ˎ
and/or other countries.
ˎ This product contains technology subject to certain intellectual property rights of Microsoft. ˎ
Use or distribution of this technology outside of this product is prohibited without the appropriate license(s)
from Microsoft.
ˎ The BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use ˎ
of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their
respective owners.
ˎ The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other ˎ
countries.
ˎ Android™ is a trademark of Google Inc. ˎ
Precautions
On safety On placement
ˎ Completely disconnect the power cord (mains lead) ˎ ˎ Do not set the speakers in an inclined position. ˎ
from the wall outlet (mains) if it is not going to be ˎ Do not place the speakers in locations that are: ˎ
used for an extended period of time. When
ˋ Extremely hot or cold ˎ
unplugging the system, always grip the plug. Never
ˋ Dusty or dirty ˎ
pull the cord itself.
ˋ Very humid ˎ
ˎ Should any solid object or liquid get into the
ˎ
ˋ Subject to vibrations ˎ
system, unplug the system, and have it checked by
ˋ Subject to direct sunlight ˎ
qualified personnel before operating it again.
ˎ The AC power cord can be changed only by a ˎ Use caution when placing the speaker on a ˎ
ˎ
specially treated (waxed, oiled, polished, etc.) floor,
qualified service facility.
as staining or discoloration may result.
On operation
ˎ If you install the system with its back against a wall, ˎ
position it at least 10 cm away from the wall so as
ˎ Do not drive the speaker system with a continuous ˎ
wattage exceeding the maximum input power of not to block the ventilation slots and prevent heat
release.
the system.
ˎ If the polarity of the speaker connections is not ˎ
On cleaning
correct, the bass tones will be weak and the
Clean the speaker cabinets with a soft cloth lightly
position of the various instruments obscure.
moistened with a mild detergent solution or water.
ˎ Before connecting, turn off the amplifier ˎ
Do not use any type of abrasive pad, scouring
(subwoofer) to avoid damaging the speaker system.
powder, or solvent such as alcohol or benzine.
ˎ The speaker grille cannot be removed. Do not ˎ
attempt to remove the grille on the speaker system.
On your TV's color
If you try to remove it, you may damage the
If the speakers should cause your TV screen to have
speaker.
color irregularity, turn off the TV then turn it on after
ˎ The volume level should not be turned up to the ˎ
15 to 30 minutes. If color irregularity should persist,
point of distortion.
place the speakers further away from your TV set.
BLUETOOTH wireless technology
BLUETOOTH wireless technology is a short-range wireless technology linking digital devices, such
as personal computers and digital cameras. Using the BLUETOOTH wireless technology, you can
operate the units involved within a range of about 10 meters.
The BLUETOOTH wireless technology is commonly used between two devices, but a single device
can be connected to multiple devices.
You do not need wires to get connected as you do with a USB connection, and you do not need to
place the devices face to face as you do with wireless infrared technology.
You can use the technology with one BLUETOOTH device in your bag or pocket.
BLUETOOTH wireless technology is a global standard supported by thousands of companies.
These companies produce products that meet the global standard.
Supported BLUETOOTH version and profiles
Profile refers to a standard set of capabilities for various BLUETOOTH product capabilities.
The system supports the following BLUETOOTH version and profiles.
(1)
Supported BLUETOOTH version:
BLUETOOTH Standard version 2.1 + EDR (Enhanced Data Rate)
Supported BLUETOOTH profiles:
A2DP (Advanced Audio Distribution Profile)
Notes
ˎ For you to use the BLUETOOTH function, the BLUETOOTH device to be connected must support the same
ˎ
profile as the system. Even if the device supports the same profile, the functions may differ because of the
specifications of the BLUETOOTH device.
ˎ The audio playback on the system may be delayed from that on the BLUETOOTH device because of the
ˎ
characteristics of the BLUETOOTH wireless technology.
Effective communication range
BLUETOOTH devices should be used within approximately 10 meters (unobstructed distance) of
each other. The effective communication range may become shorter under the following
conditions.
ˎ When a person, metal object, wall or other obstruction is between the devices with a BLUETOOTH connection ˎ
ˎ Locations where a wireless LAN is installed ˎ
ˎ Around microwave ovens that are in use ˎ
ˎ Locations where other electromagnetic waves occur ˎ
Effects of other devices
BLUETOOTH devices and wireless LAN (IEEE 802.11b/g) use the same frequency band (2.4 GHz).
When using your BLUETOOTH device near a device with wireless LAN capability, electromagnetic
interference may occur. This could result in lower data transfer rates, noise, or inability to connect.
If this happens, try the following remedies:
ˎ Try connecting the system and BLUETOOTH mobile phone or BLUETOOTH device when you are at least 10
ˎ
meters away from the wireless LAN equipment.
ˎ Turn off the power to the wireless LAN equipment when using your BLUETOOTH device within 10 meters. ˎ
Effects on other devices
The radio waves broadcast by the system may interfere with the operation of some medical
devices. Since this interference may result in malfunction, always turn off the power on the system,
BLUETOOTH mobile phone and BLUETOOTH device in the following locations:
ˎ In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present ˎ
ˎ Near automatic doors or fire alarms ˎ
Notes
ˎ The system supports security functions that comply with the BLUETOOTH specification as a means of ensuring ˎ
security during communication using BLUETOOTH technology. However, this security may be insufficient
depending on the setting contents and other factors, so always be careful when performing communication
using BLUETOOTH technology.
ˎ Sony cannot be held liable in any way for damages or other loss resulting from information leaks during
ˎ
communication using BLUETOOTH technology.
ˎ BLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same ˎ
profile as the system.
ˎ BLUETOOTH devices connected with the system must comply with the BLUETOOTH specification prescribed by
ˎ
the BLUETOOTH SIG, Inc., and must be certified to comply. However, even when a device complies with the
BLUETOOTH specification, there may be cases where the characteristics or specifications of the BLUETOOTH
device make it impossible to connect, or may result in different control methods, display or operation.
ˎ Noise may occur or the audio may cut off depending on the BLUETOOTH device connected with the system, ˎ
the communications environment, or surrounding conditions.
Specifications
Satellite speakers BLUETOOTH section
Speaker System Full range, Bass reflex Communication system
Speaker units 80 mm cone type BLUETOOTH Specification version
Rated impedance 10 ohms
Dimensions (approx.) 106 mm × 188 mm ×
96 mm (w/h/d) Output
Mass (approx.) 0.5 kg BLUETOOTH Specification Power
Subwoofer
Maximum communication range
Speaker System Active subwoofer, Bass
Line of sight approx. 10 m*
reflex
Frequency band
Speaker units 180 mm cone type
2.4 GHz band (2.4000 GHz - 2.4835
Rated impedance 3 ohms
Dimensions (approx.) 260 mm × 365 mm ×
Modulation method
365 mm (w/h/d)
FHSS (Freq Hopping Spread
Mass (approx.) 6.1 kg
Inputs Compatible BLUETOOTH profiles*
A2DP (Advanced Audio Distribution
DVD Pin Jack (L/R) × 1
TV Stereo mini jack × 1
Supported Codecs*
(USB) port Type A
SBC*
4
Amplifier section
Transmission range (A2DP)
Satellite speakers
20 Hz - 20,000 Hz (Sampling
Power output (rated):
20 W + 20 W (at 10 + 10 ohms, 1 kHz, 1% THD)
*1 The actual range will vary depending on
RMS output power (reference):
factors such as obstacles between devices,
28 W + 28 W (at 10 + 10 ohms, 1 kHz, 10% THD)
magnetic fields around a microwave oven,
Subwoofer
static electricity, cordless phone, reception
RMS output power (reference):
sensitivity, operating system, software
44 W (at 3 ohms, 100 Hz, 10% THD)
application, etc.
*2 BLUETOOTH standard profiles indicate the
USB section
purpose of BLUETOOTH communication
Supported bit rate
between devices.
MP3 (MPEG 1 Audio Layer-3):
*3 Codec: Audio signal compression and
32 kbps – 320 kbps,
conversion format
VBR
*4 Subband Codec
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
General
Sampling frequencies
Power requirements:
MP3 (MPEG 1 Audio Layer-3):
DC 20 V 1.0 A (supplied AC power adaptor)
32 kHz/44.1 kHz/48 kHz
AC power adaptor
WMA: 44.1 kHz
Input: 100 V – 240 V AC, 50/60 Hz
AAC: 44.1 kHz
Output: DC 20 V 3 A
Transfer speed
Power consumption: 20 W
Full-Speed
Supported USB device
Design and specifications are subject to
Mass Storage Class
change without notice.
Maximum current
500 mA
Unpacking
ˎ Satellite speakers ˎ Subwoofer (1)
ˎ ˎ
(4)
ˎ Foot pads (1 set) ˎ
Attaching the foot pads to the satellite speakers
Attach the foot pads (supplied) to the bottom of the speakers to stabilize the speakers and
prevent them from slipping.
Remove the foot pads
from the protective cover.
Inserting the batteries into the remote
Insert two R03 (size AAA) batteries (supplied) by matching the  and  ends on the batteries to
the marking inside the compartment. To use the remote, point it at the remote sensor
subwoofer.
Notes
ˎ Do not leave the remote in an extremely hot or humid place. ˎ
ˎ Do not use a new battery with an old one. ˎ
ˎ Do not drop any foreign object into the remote casing, particularly when replacing the batteries. ˎ
ˎ Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a ˎ
malfunction.
ˎ If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible ˎ
damage from battery leakage and corrosion.
Index to parts and controls
Subwoofer
Front panel indicators
2.1 + EDR (Enhanced
 
Data Rate)
Class 2
1
GHz)
 
Spectrum)
2
 / (on/standby) button
Profile)
Turns on the system, or sets it to standby
3
mode.
 N mark
frequency 44.1 kHz)  FUNCTION indicators
ˎ DVD
ˎ
TV
ˎ
USB
ˎ BLUETOOTH
Lights up in green when the function is
selected. (BLUETOOTH function: lights up or
blinks in blue.) When the system turns on,
the indicator of the function that was set
last time lights up.
Remote commander (remote)





Set Up
ˎ Stereo mini plug ˎ Remote commander Step 1: Positioning the speakers
ˎ ˎ
cord (1) (remote) (1)
ˎ R03 (size AAA) ˎ Place all speakers and subwoofer anywhere you like to in the room. Wherever the speakers are
batteries (2) placed, you will be able to achieve the best possible sound from them.
ˎ AC power adaptor
ˎ
(1)
ˎ Power cord (1) ˎ
To install the speakers on a wall

Prepare screws ( ) (not supplied) that are suitable for the hole on the back of each speaker (
Then, fasten the screws to the wall (

30 mm
Caution
ˎ Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or ˎ
improper screw installation, natural calamity, etc.
Step 2: Connecting the speakers
on the
Be sure to match the speaker cords to the appropriate terminals on the subwoofer as below.
Subwoofer
  
Note
ˎ When you connect another component with a volume control, turn down the volume of the other components ˎ
to a level where sound is not distorted.
Step 3: Connecting the system to your TV, DVD player, and the mains
Before connecting the system to the mains, connect it to your TV and DVD player first.
 FUNCTION button
Subwoofer
Selects an input source.
 USB PLAYBACK buttons
 (remote sensor)
 (USB) port
1
 / (on/standby) Connect the system to your TV and DVD player as in the illustration
Turns on the system, or sets it to standby above.
mode.
2
Connect the power cord to the AC power adaptor. Then connect the AC
 FUNCTION
Selects an input source. power adaptor to the system.
  (play/pause)
3
Connect the AC power adaptor to the mains.
Starts/Pauses playback on a USB device.
The subwoofer enters standby mode.
  (rewind/skip back)/ (fast
Caution
forward/skip forward), +/–
ˎ Do not use an AC power adaptor other than the one supplied with this system. ˎ
Selects files/folders on a USB device.
 VOLUME +/–
Adjusts the volume.
There is a tactile dot to the right of the
VOLUME + button. Use the tactile dot as a
reference when operating the remote.
Satellite Satellite
speakers (L) speakers (R)
Subwoofer

).

). You can hang the speakers on the screws.
 
5 mm
4 mm
10 mm
6 to 7 mm
ˎ
Satellite speakers (R) Satellite speakers (L)
To headphone jack
TV
Stereo mini plug cord
To stereo output
DVD player
Audio cable
(not supplied) To mains
AC power adaptor
Power cord
Continued 