Table of Contents
Advertisement
At Key-On, the instrument panel always shows the following
E
information (de-activating any previously activated
functions):
ODOMETER
SPEED
RPM BARGRAPH
ENGINE OIL TEMPERATURE BARGRAPH
With the switch (1, fig. 10) in position B "▼" the Odometer
readout (TOT) will cycle through the following functions:
TRIP
TRIP FUEL (only if active)
CLOCK
before returning to TOT (odometer function).
Pressing switch (1, fig. 10) in position A "▲" gives access to
the MENU and the following functions are displayed one
after another:
ERROR (only if active)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
LAP MEM
DDA (OFF or ON)
ERASE DDA
DISAB ABS
CLOCK SETTING
CODE (only if active)
18
A
1
B
Important
This menu is active only if the speed of the motorcycle
is less than 20 km/h. If this MENU is open and the speed of
the motorcycle exceeds 20 km/h, the instrument panel
automatically exits the menu and returns to the initial display.
It is possible to exit the menu at any time, however, by
pressing switch (1, fig. 10) in position A "▲" for 3 seconds.
fig. 10
Advertisement
Table of Contents
