Ink Ribbon And Paper; Specifications - Sony UP-D55 Instructions For Use Manual

Ink Ribbon and Paper

Both paper and an ink ribbon are necessary for printing.
Use the ink ribbon with the paper contained in the same
package.
UPC-55 Color Printing Pack
Contains color ink ribbon cartridge and paper.
Color ink ribbon for 100 sheets, 2 rolls
Paper, 1 package (100 sheets) ×2
Note
If the paper has been exhausted, replace the ink ribbon
together with the paper.

Specifications

Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input Current 2.8 A max. at 25 °C
(for 100 to 120 V AC users)
1.2 A max. at 25 °C
(for 220 to 240 V AC users)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to 60 °C (–4 °F to 140 °F)
Storage and transport humidity
20% to 90% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 280 × 125 × 398 mm (w/h/d)
(11 1/8 × 5 × 15 3/4 inches)
Mass Approx. 9 kg (19 lb 13 oz)
Printing system
Sublimation heat transfer printing
Printable pixels
When printing the full-image: 2528 ×
1920 dots
Total gradation 256 levels each for yellow, magenta,
and cyan
Printing time When the printer is set to high speed:
Approximately 20 seconds
Thermal head 14.93 dots/mm
(USB) connector
Universal Serial Bus (USB)
Specification Revision 2.0
Input connector
AC IN (for power input)
Supplied accessories
Paper tray (1)
USB cable 1-824-211-41 (Sony) (1)
Ink ribbon holder (1)
Software License Agreement (1)
Before Using this Printer (1)
CD-ROM (including the printer drivers
and PDF files of multi-lingual
Instructions For Use) (1)
Service Contact List (1)
Optional accessories
UPC-55 Color Printing Pack
Medical Specifications
Protection against electric shock:
Class I
Ink Ribbon and Paper / Specifications
19