Download Print this page

Oscillation Function - Taurus tropicano 2C compact User Manual

Fan heater

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
- This appliance should be stored out of
reach of children and/or handicapped
people.
- Make sure that the fan grille on the appli-
ance is not blocked by dust, dirt or other
foreign objects.
- Turn the thermostat control to the mini-
mum setting. This does not mean that the
iron is switched off permanently.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
- Connect the appliance to the mains.
- Start the appliance, press the speed/
power button.
- Turn the thermostat control to the desired
temperature position.
Fan function:
- Select the fan position.
- Check that the thermostat button is set to
the maximum.
Heater function:
- Select the heater position.
- Select the desired heating power.
- Check that the thermostat control is set to
the temperature required.

Oscillation function:

- The oscillation function allows you to
direct the appliance's flow alternatively and
automatically, forming a 90-degree angle.
- To activate this function, press the F
switch.
- To inactivate this function, do the contrary
of what you did when activating it.
Manual Tropicano.indd 11
Manual Tropicano.indd 11
Once you have finished using the ap-
pliance:
- Stop the appliance by switching off the
speed and power control switch.
- Unplug the appliance from the mains.
Transport:
- This appliance has a handle fitted at the
rear in order to facilitate carrying.
Thermic safety protector:
- The appliance has a thermic safety device
which protects the appliance from overheat-
ing of any kind.
- If the appliance disconnects itself and
does not connect again, unplug it from the
mains and wait for about 5 minutes before
connecting it again. If it is still out of opera-
tion, go to an authorised technical support
service.
Cleaning
- Disconnect the appliance from the mains
and allow to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Never submerge the appliance in water
or any other liquid or put it under running
water.
- N.B. When the appliance is used as a
heater after long periods in storage or after
having been used solely as a fan a small
amount of smoke may be produced. This is
01.06.06 15:16:24
01.06.06 15:16:24

Advertisement

loading