Setting The Service Adjustment Mode; White Balance Adjustments; Section 2: Adjustments - Sony KLV-26HG2 Service Manual

2-1. SETTING THE SERVICE ADJUSTMENT
MODE
1. Standby mode (Power off).
2. Press the following buttons on the remote commander within a
second of each other:
Display
Channel 5

2-2. WHITE BALANCE ADJUSTMENTS

1. Input a grayscale pattern.
2. Enter into Service Mode.
3. Select ADJ ITEM from the Service Mode menu.
4. Press the MENU button on the remote to display the Customer Menu.
5. From the Mode list select VIVID.
6. From the Mode list select: Dynamic Picture = Off
7. From the Mode list select: Color Temp = Cool
8. Press the MENU button on the remote to clear the customer menu.
9. From the ADJ ITEM list do the following:
a. Adjust R DRIVE, G DRIVE, and B DRIVE for correct white balance in
high lighted areas.
b. Adjust R BKG, G BKG, and B BKG for correct white balance in low
lighted areas.
Note: Adjusments automatically save.
10. Repeat steps 4 through 9 for Neutral and Warm mode.
11. When changes are complete, turn the set off then back on.
KLV-26HG2

SECTION 2: ADJUSTMENTS

Sound Volumne + Power
KLV-26HG2
12