Related Manuals for Prem-I-Air EH0154
Summary of Contents for Prem-I-Air EH0154
- Page 1 EH0154 2 kW Fan Heater 2 Heat settings 2 Positions: Letterbox or upright Adjustable thermostat Built-in carrying handle Safety overload cut-out Safety tilt-switch Page 1...
-
Page 2: Operation
These instructions should be read carefully and left with the user of the product for future reference. OPERATION Place the EH0154 on a firm flat surface. It can be used either upright or in the "letterbox" orientation as shown on the front cover. -
Page 3: Product Safety
PRODUCT SAFETY • This appliance is not intended for use by persons (including children) with reduced physical, sensory mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •... -
Page 4: Pat Testing
PAT TESTING When used in an office environment, this product must be safety-tested yearly by a qualified electrician (PAT Tested) in order to comply with the Electricity at Work Regulations. We recommend that it is PAT tested regularly when used in a domestic environment. - Page 5 If the mains lead is damaged, it must be replaced by the manufacturer or and authorised service centre. If the mains plug needs to be replaced, proceed as follows: • Connect the brown wire to the terminal labelled "L". • Connect the blue wire to the terminal labelled "N".
-
Page 6: Fault Finding
FAULT-FINDING If the appliance is not operating, proceed as follows: Check that the mains plug is firmly in the socket, and that the socket is switched ON. Check that at least one of the power control switches is switched ON. The appliance also has a overload protection device to prevent overheating. -
Page 7: Service / Warranty
Operating current: 8.7 A SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of two years. Should this appliance be operated under conditions other than those recommended, at voltages other than the voltage...