Operation; Basic Operation - Lanzar SDBT75NU Owner's Manual

OPERATION

BASIC OPERATION

Turning the player on/off
Shortly press button on the front panel
or on the remote control to turn the player
on.
When the unit is on, press and hold
button on the front panel or shortly press
button on the remote control will turn
the unit off.
(Note: Shortly press
panel will return the previous menu.)
Open/Close the Monitor
Press button on the front panel the
monitor will draw out automatically.
Press this button
to draws out the monitor
When the monitor draws out to a certain
location, it will turn upward automatically
and stop at vertical position.
Return the monitor to the central viewing
position, then press
panel .
the monitor will turn downward
automatically.
When the monitor turns downward to a
certain angle, it will draw in.
Note: The panel has automatic protection
function. If the panel was hit by suddenly,
it would be pushed into the unit. Please
button on the front
button on the front
wait for several seconds, the panel will
slide out automatically.
Screen Ajustment (Angle/ Slide/
Picture)
1) Method A (Adjust the angle/ slide/
picture):
When the monitor stops moving, touch
the screen you will see the following
picture(for the different mode the picture
has a little difference):
Touch the SCR icon on the screen or
press SET/SRC button on the front panel,
the following picture will appear:
Tap icon to adjust the monitor angel
/
upward/downward in small steps or draw
the panel in/out to get a desired viewing
position.
Tap the PICTURE icon on the screen,
touch to adjust the picture among
/
Bright /contrast /Color /Tint. Or use
icon to adjust the picture continuously.
Shortly press SET/SRC on the front panel
to select Angle or Slide items. Then use
+/-buttons on the front panel to turn the
monitor angel upward/downward in small
steps or draw the panel in/out to get a
desired viewing position.
And you can rotate the monitor left and right
from the central viewing position at a
certain angle range manually.
16
/