Sony PlayStationPortable Go Instruction Manual page 46

Table of Contents

Advertisement

Available languages

Available languages

If a device that causes radio interference such as a
microwave oven is nearby, system communications may not
work properly.
The Web page does not display properly.
Certain content, such as content that requires specialized
software, may not display properly on some Web pages.
Bluetooth
®
The Bluetooth
device cannot be registered, or paired, with
®
the PSP
system.
There may be too much distance between the system and
the Bluetooth
device.
®
The Bluetooth
device may not be compatible with the
®
profiles that are supported by the system.
The maximum number of Bluetooth
paired is eight. Try deleting a registered device to pair a
new device.
A connection cannot be established between the Bluetooth
device and the PSP
Check that the Bluetooth
If it is not paired, go to (Bluetooth
[Manage Bluetooth
pair the device.
Check that the Bluetooth
If the Bluetooth
with the system again.

Before requesting service
devices that can be
®
system.
device is paired with the system.
®
Device Settings)
®
Devices] [Register New Device] to
®
device is turned on.
®
device has been reset, you must pair it
®
There is no sound from the Bluetooth
Check that the Bluetooth
Try adjusting the volume on either the Bluetooth
the PSP
system.
There is noise. The sound is not continuous.
If there are obstacles such as walls between the PSP
system and the Bluetooth
the devices and then connect the Bluetooth
If a device that causes radio interference such as a
microwave oven or an induction cook top or appliance is
nearby, communication with the system may not work
properly.
There is a delay in the audio.
Due to the characteristics of Bluetooth
may be a delay in the audio. If you feel the lag in the audio
is a problem, use wired headphones instead.
Other issues
®
The system or AC adaptor is warm.
During use, the system or AC adaptor may become warm.
This is not a malfunction.
When the communication function is being used, the
system may become warmer than during normal use. This
is not a malfunction.
device.
®
device is not set in mute mode.
®
device or
®
device, change the location of
®
device again.
®
technology, there
®

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psp-n1002 goPsp-n1003 go

Table of Contents