nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
9.) Carefully open the LCD connector. Do not to damage
the LCD connector.
11.) Lever out the LCD Module from the UI Shield.
13.) Separate the Light Guide Assy from the Engine
Module. Do not use the SRT-6 on the right side to avoid
damaging underneath components.
15.) Remove the DC-Jack with a DC-Plug.
Service Manual 6021 Level 1&2
PAGE 13 (22)
CONFIDENTIAL
10.) Remove UI Shield Assy with the LCD Module.
12.) Protect the LCD Module with a protective film.
14.) Now, take away the Light Guide Assy.
16.) Remove the Microphone with tweezers.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
17.3.2005