Pci Card; Pci Riser Card; Network Interface Controller - NEC Express5800/R120f-1E System Configuration Manual

SYSTEM CONFIGURATION GUIDE

6 PCI Card

Please refer to
can mount PCI card supported.

6.1 PCI Riser Card

Product Name / Description
PCIe Riser Card Kit
3 x PCIe 3.0 x8
PCIe x8 Riser Card Kit
4 x PCIe 3.0 x8
PCIe x16 Riser Card Kit
2 x PCIe 3.0 x16, 2 x PCIe 3.0 x8
NOTE:

N8116-33 PCIe x16 Riser Card Kit is supported in dual-processor configuration.

6.2 Network Interface Controller

Category
LOM Card
Adapter
NEC Corporation
–
NEC Express5800R120f-1E
Supported PCI Cards and Installable Slots
Product Name / Description
1GbE Quad Port 1000BASE-T LOM Card
Broadcom® BCM5719
PCIe 2.0 x4
10GbE Dual Port 10GBASE-T LOM Card
Intel Ethernet Controller X540
PCIe 2.0(x8)
Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card
Qlogic NetXtreme II BCM57800S
PCIe 2.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to two SFP+ Modules can be installed.
1GbE 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
Dual Port 1000BASE-T Adapter
Intel® 82580 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- PXE boot is not supported on UEFI environment.
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
10GbE Dual Port 10GBASE SFP+ Adapter (SFP+/2ch)
Intel 82599ES 10 Gigabit Ethernet Controller
PCIe 2.0 x8, Low Profile / Full Height
NOTE:
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to 2 SFP+ Modules can be installed.
Revision 6.0 – July 16, 2015
with regard to the position of PCI slot which
Part Number
(Standard)
N8116-39
N8116-33
Part Number
N8104-154F
N8104-155F
N8104-156F
N8104-150
N8104-151
N8104-145
N8104-152
N8104-148
20