DeWalt DC013-XE Instruction Manual page 6

Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger and the
battery pack show the following pictographs:
Read instruction manual
before use.
Battery charging.
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D WALT battery packs, others may burst, causing personal
E
injury and damage.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for the environment.
Do not incinerate the battery pack
NiMH, NiCd+ and Li-Ion.
Charges NiMH and NiCd
battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corp oration) Seal on the
nickel cadmium, nickel metal hydride or lithium ion batteries (or
battery packs) indicate that the costs to recycle these batteries (or
battery packs) at the end of their useful life have already been paid
by D WALT. In some areas, it is illegal to place spent nickel
E
cadmium, nickel metal hydride or lithium ion batteries in the trash
or municipal solid waste stream and the RBRC™ program provides
an environmentally conscious alternative.
RBRC™ in cooperation with D WALT and other battery users, has established
E
programs in the United States and Canada to facilitate the collection of spent nickel
cadmium, nickel metal hydride or lithium ion batteries. Help protect our environment
and conserve natural resources by returning the spent nickel cadmium and nickel
cadmium, nickel metal hydride or lithium ion batteries to an authorized D
service center or to your local retailer for recycling. You may also contact your local
recycling center for information on where to drop off the spent battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.
4
WALT
E