Lanier IS100e Operator's Manual

Lanier scanner operator manual
Table of Contents

Advertisement

Quick Links

Operator Manual
IS100e
IS100e
IS100e
IS100e
Operator Guide
you r do cu me nt m an a geme nt p ar t n er

Advertisement

Table of Contents
loading

Summary of Contents for Lanier IS100e

  • Page 1 Operator Manual IS100e IS100e IS100e IS100e Operator Guide you r do cu me nt m an a geme nt p ar t n er...
  • Page 3: Safety Information

    Safety Information When using this equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: Indicates potentially hazardous situations, which if instructions are not followed, could result in death or serious injury. Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.
  • Page 4 Precautions Do not install the equipment near heating or air conditioning units. Do not install the equipment in a humid or dusty place. Be sure to use the proper AC power source. Place the equipment securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feeding problems.
  • Page 5: Copyrights And Trademarks

    Notice Important Do not make copies of any item for which copying is prohibited by law. Copying the following items are normally prohibited by the local law: Bank bills, revenue stamps, bonds, stock certificates, bank drafts, checks, pass-ports, driver's licenses. This machine is equipped with a function that prevents making counterfeit bank bills.
  • Page 6 Warranty The information contained in this document(s) is subject to change without notice. The manufacturer makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose. The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 7: Table Of Contents

    Table of Contents Getting Started... 1-1 Introduction ... 1-1 Features ... 1-2 External View ... 1-3 The front view ... 1-3 The rear view... 1-4 Control Panel ... 1-5 Pre Installation Information... 1-8 Internet Communication Features ... 1-10 e-mail forwarding... 1-10 Filing document to a server...
  • Page 8 To Administer the setting screen via the LCD-display ... 3-1 To Administer IMAGE SCANNER IS100e’s Web Page ... 3-3 Summary of Administrator Activities ... 3-4 Managing the Address Book ... 4-1 Managing Your E-mail Address Book ... 4-1 adding an e-mail address ... 4-1 Modifying e-mail addresses ...
  • Page 9 Sending E-mails ... 6-5 Making Copy ... 6-8 Before making copy ... 6-8 basic operating steps ... 6-9 accessing Copy Features... 6-10 Start Filing Document... 6-17 Work with the control panel... 6-17 Troubleshooting ... 7-1 Information Codes/Message... 7-1 Information Codes During Networking... 7-2 Information Codes During E-Mailing ...
  • Page 10 viii...
  • Page 11: Getting Started

    With IMAGE SCANNER IS100e, you have power to instantly send your business document to designated recipients at any place in the world. When you apply IMAGE SCANNER IS100e to your work, you no longer need to run to a copy center for making copy and someone’s computer for filing document, not to mention wasting cost and time in the postal mail method.
  • Page 12: Features

    Filing Document: IMAGE SCANNER IS100e allows you to send your documents to a server or a personal computer’s file folder over intranet with FTP, protocol.
  • Page 13: External View

    External View THE FRONT VIEW ADF Front Cover LCD-display 3. ADF Paper Tray 4. ADF Paper Support 5. Document(s) Cover 6. Control Panel Getting Started...
  • Page 14: The Rear View

    THE REAR VIEW 1. Paper Feed Tray 2. ADF Cable 3. Keyboard Port RJ-45 Network Port 5. Power Switch Getting Started 6. Power Jack 7. ADF Port 8. Printer Port...
  • Page 15: Control Panel

    Control Panel Part A Part A: Scaling Area: Used to reduce document(s) down to 25% or enlarge it up to 400%. (155%) (129%) (121%) (78%) (65%) Increase scaling in 1% increment Decrease scaling in 1% Decrement Select scaling from the preset percentage Part B Part C (93%)
  • Page 16 Part B: LCD-display & Function Keys: Used to display current operation and select key working mode. Function Keys and others: Press to use the Copy function. Press to use the e-mail function. Press to use the filing function. Press to select an e-mail address from an address book or folder name from a folder book.
  • Page 17 Part C: The Numeric/Character Keypad: Used to enter the network parameters or copy page number. Part D: Start & Other Keys: Used to select scanning resolution and start sending or copying document(s). Used to stop sending process or clear previous operation. Stands for Super Fine.
  • Page 18: Pre Installation Information

    Pre Installation Information IMAGE SCANNER IS100e has to be setup properly on your network to perform e-mail and filing functions. The following network parameters have to be set. For required information and LAN connection, please contact your network administrator. Important ! Make a copy of the following table and ask your Network Administrator to complete the information.
  • Page 19 Explanation of contents: 1. *IP Address: 2.Subnet Mask: 3. Gateway IP: 4.DNS Server 5. NTP Server: 6. *SMTP Server: The IP address of your SMTP Mail Server 7. SMTP Port: 8. POP3 Server: Note: *IP Address: An IP (Internet Protocol) address uniquely identifies a host connection to an IP network.
  • Page 20: Internet Communication Features

    When you send an e-mail to someone via IMAGE SCANNER IS100e, IMAGE SCANNER IS100e uses Simple Mail Transfer Protocol (SMTP) to transfer your outgoing e-mail to your SMTP mail server, and then to send your e-mail to the Internet.
  • Page 21: Filing Document To A Server

    Filing document over intranet: Through the intranet with FTP, HTTP, CIFS, or AVPP protocol, IMAGE SCANNER IS100e allows you to put document directly to a designated server or personal computer’s file folder in one of these compressed formats, pdf, tiff, and jpeg. CIFS is the sharing system of Microsoft Windows.
  • Page 22 1-12 Getting Started...
  • Page 23: Setting Up Your Machine

    2 Setting up Your Machine Minimum Configuration Requirements To make the best of IMAGE SCANNER IS100e, the following configuration is required: To send e-mails from IMAGE SCANNER IS100e: TCP/IP network A SMTP server To file document(s) via intranet FTP, HTTP, CIFS, or AVPP Protocol environment...
  • Page 24: Checking Package Contents

    Checking Package Contents Unpack the box and check its components. If there is any item missing, contact your dealer immediately. Paper Feed Tray Paper Support IS100e Main Body Paper Stopper User’s Manual, Quick Guide, CD-ROM Power Adapter Power Cord Setting up Your Machine 8.
  • Page 25: Unlocking The Scan Unit

    1). Locate the lock switch underneath the machine. Note: If you need to move your IMAGE SCANNER IS100e for repair or any other reason, be sure to lock your IMAGE SCANNER IS100e before moving. To lock your IMAGE SCANNER IS100e, please do the following, Turn off your IMAGE SCANNER IS100e.
  • Page 26: Installing The Paper Feed Tray

    Installing the Paper Feed Tray Attach the Paper Support to the Paper Feed Tray. Paper Feed Tray Paper Support Then, attach the Paper Feed Tray to the machine. Setting up Your Machine...
  • Page 27: Connecting The Cables

    Connect one end of your Ethernet LAN cable to an available port of your Ethernet Hub Connect the other end to the network port at the back of your IMAGE SCANNER IS100e. CONNECTING THE KEYBOARD CABLE Connect the cable of the keyboard to the PS2 port at the back of IMAGE SCANNER IS100e.
  • Page 28: Connecting The Printer Cable

    CONNECTING THE PRINTER CABLE Connect one end of the printer cable to your printer. Connect the other end to the printer port of your IMAGE SCANNER IS100e. CONNECTING THE ADF CABLE Connect the ADF (Auto Document Feeder) cable (attached to the document(s) cover) to the ADF port at the back of IMAGE SCANNER IS100e.
  • Page 29 LCD display prompts the Copy ready status (present) as shown below. Note: You can leave your IMAGE SCANNER IS100e ON at all times since IMAGE SCANNER IS100e is designed with a power saving function. If IMAGE SCANNER IS100e is idle for four hours, it automatically shuts off the scanning lamp.
  • Page 30: Setting Up Your Network Parameters

    Setting up Your Network Parameters Before using IMAGE SCANNER IS100e, please setup IMAGE SCANNER IS100e properly on your network to perform e-mail and filing functions. The following network parameters have to be set. For required information and LAN connection, please contact your network administrator.
  • Page 31 Note: *NTP Server: Stands for Network Time Protocol. To set the correct clock on IMAGE SCANNER IS100e, it is recommended to fill in the IP address of your NTP server. To set the clock for IMAGE SCANNER IS100e, in addition to...
  • Page 32 2-10 Setting up Your Machine...
  • Page 33: Administration

    Administration This chapter describes how to perform the administrator activities either on the control panel or on IMAGE SCANNER IS100e web page. The access to the administrator activities (Network Configuration and Administrator) is blocked by the administrator password. It is recommended that an administrator create a password before entering these activities.
  • Page 34 Use the “up” key or the “down” key to move between the menus. Use the “OK” key to enter each menu. To exit from the menu, use the “Cancel” key. Press Save&Exit to save the changes and exit from the menu. For the contents of each menu, please see the subsequent section, Summary of Administrator Activities.
  • Page 35: To Administer Image Scanner Is100E's Web Page

    1. Start your browser, either I.E or Netscape. Both I.E. and Netscape must be 4.0 or higher. 2. Type the IP address of your IMAGE SCANNER IS100e in the URL field of your browser. IMAGE SCANNER IS100e web page appears.
  • Page 36: Summary Of Administrator Activities

    Default text for the Subject field in e-mail messages from IMAGE Default Subject SCANNER IS100e. Up to 64 characters are allowed. The default subject is used only when users did not enter anything in the Subject field in e-mail message from IMAGE SCANNER IS100e.
  • Page 37 Myfile1120, Myfile1260,etc.. B/W File Format File format for documents to be sent in black and white via e-mail from IMAGE SCANNER IS100e. Choice: PDF or TIF Color File Format File format of the color documents to be sent in color via e-mail from IMAGE SCANNER IS100e.
  • Page 38 Choice: Copy, E-mail, and Filing Administrator Admin. Login Name Logging in the administrator’s name on IMAGE SCANNER IS100e If the administrator intends to change the current user name, please key in his new name in this field and then re-log in.
  • Page 39 Function and the e-mail address (The e-mail address will show up on the “From” field in the E-mail LCD screen of IMAGE SCANNER IS100e, and can not be changed by the user.) If the user has not logged in this data on IMAGE SCANNER IS100e,...
  • Page 40 Choice: Add, Delete, and Modify It is allowed to create 50 folders at most in IMAGE SCANNER IS100e. The preset content of the folders contains Name (name of the folder), Protocol (TCP/IP), Server IP (IP address of the filing server), Directory (path of the filing directory), Server UID (log-in account number of server), and Password (for logging in Server UID).
  • Page 41: Managing The Address Book

    ADDING AN E-MAIL ADDRESS To add an e-mail address, Start your browser, Microsoft I.E. or Netscape Communicator. Type IP address of your IMAGE SCANNER IS100e in the URL field. For example, http://xxx.xxx.xxx.xxx IMAGE SCANNER IS100e web page appears as shown below.
  • Page 42 Press the Administrator button to prompt the Login dialog. Enter the name and password of the administrator and press the "Submit" button. The Administrator screen appears. Press "@ddress" to prompt the Address Book dialog. Press the E-mail icon and choose Add to prompt the Add a New E-mail Address dialog.
  • Page 43 Continue for the next input or Finish to temporarily save the latest data and return to the main screen. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing the Address Book 4-3...
  • Page 44: Modifying E-Mail Addresses

    Modify your address. Click Update to temporarily save the latest data, or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing the Address Book...
  • Page 45: Deleting E-Mail Addresses

    Click Delete to erase the address. A warning message appears to confirm your deletion. Click OK to confirm or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing the Address Book 4-5...
  • Page 46: Managing Your Groups

    Click Continue for the next input or Finish to temporarily save the latest data and return to the main screen. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing the Address Book...
  • Page 47: Modifying Groups

    Ù key to insert to the group. Click Update to temporarily save the latest data, or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing the Address Book 4-7...
  • Page 48: Deleting Groups

    Click OK to confirm or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Note: A Group can be a combination of several e-mail addresses.
  • Page 49: Managing Filing Folders

    Both HTTP and AVPP use RFC 2616[HTTP 1.1] as their protocol. If you are not using the HTTP port or AVPP port 80 to save the files, you must change the HTTP Port or AVPP Port of IMAGE SCANNER IS100e to the port for the Web Server.
  • Page 50 "browse" and allow for writing in Web Server; otherwise, IMAGE SCANNER IS100e will not be able to write the file into the directory. If you wish to use IMAGE SCANNER IS100e to save files, in addition to making some settings in Web Server, you will have to confirm the account with the privilege of writing for connecting Web Server;...
  • Page 51: Cifs (Windows Network Share)

    Microsoft Windows. Generally, under the Windows 95/98/Me Share level mode, use the "Full Control" password for the directory as the password of IMAGE SCANNER IS100e folder and leave the Server UID field blank. Under the User level mode of Windows NT/2000/XP, use the account and password with the privilege of "write"...
  • Page 52 Note: Windows NT can use local account as files saving account only. If adding a Windows NT domain, the domain account is not suitable as files saving account. Below is the Windows 98 CIFS server sharing set up screen for your reference.
  • Page 53: Filing Terminology

    Filing Terminology Folder Name: Name a folder to hold all set-up information. (Note: The folder names cannot be repeated.) Protocol: includes FTP, HTTP, AVPP, and CIFS. Server IP: the IP address of a server. Directory: The path name on Filing Server for saving image files. Please be noted that the directory setting is different according to Protocol.
  • Page 54: Adding A Filing Folder With The Control Panel

    “Save new folder “<folder name> ”?”. If you select “yes”, the folder will be saved to the machine’s memory, and can be reused. On the control panel, you can add new folders only. Updating or deleting folder function is available on IMAGE SCANNER IS100e’s home page Managing Filing Folders Myfolder...
  • Page 55: Filing Documents On The Web Page

    Click Continue for the next input or Finish to temporarily save the latest data and return to the main screen. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data.
  • Page 56: Modifying Folders

    Now, refer to the previous section to modify your folder content. Click Update to temporarily save the latest data, or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing Filing Folders...
  • Page 57: Deleting Folders

    Click Delete to erase the number. A warning message appears to confirm your deletion. Click OK to confirm or Cancel to exit. Click Save to permanently save all the latest data on IMAGE SCANNER IS100e, or Exit to leave without saving any latest data. Managing Filing Folders 5-9...
  • Page 58 5-10 Managing Filing Folders...
  • Page 59: Operation

    Operation With an intuitive control panel, easy-to-use. Basically, operating IMAGE SCANNER IS100e takes three simple steps: Load your paper either in the ADF or on the glass. Choosing the “E-Mail”, “COPY”, or “FILING” Key, and input relative items respectively. Press the "Black&White" or "Full Color" key to execute the command...
  • Page 60: Loading Paper

    Loading Paper IMAGE SCANNER IS100e can scan and send document(s) either in the ADF (Automatic Document Feeder) or on the glass. If you need to send multiple pages, please load your papers in the ADF. The ADF can hold up to 25 pages at one time. If you need to send pages from books, newspaper clippings, or paper with wrinkles or curls, please place your paper on the glass.
  • Page 61: Placing Document(S) In The Adf

    PLACING DOCUMENT(S) IN THE ADF Make sure your document is free of staples, paper clips and is not tore out. If you have multiple pages, fan your document(s) to avoid occasional paper jam. The ADF holds up to 25 pages at one time. Place your document(s) with the text FACE UP in the ADF and make sure that the top of the pages is fed in first.
  • Page 62: Placing Document(S) On The Glass

    PLACING DOCUMENT(S) ON THE GLASS Open the document(s) cover to reveal the glass. Place your document(s) with the text FACE DOWN on the glass and align the document(s) in the upper-right corner of the glass. Close the document cover. Operation...
  • Page 63: Sending E-Mails

    Sending E-mails Place your document(s) face up in the ADF or face down on the glass. Press the “E-mail” key. The LCD displays the E-mail screen. From: Subj: CC : BCC : Memo: <Size: LT> Press “E-mail” to change. You can make the temporary settings for your E-mail. -Resolutions You can select your scanning resolution between Fine (75 dpi, 100 dpi, 150 dpi, 200 dpi, 300 dpi, 400 dpi) and Super Fine (100 dpi,...
  • Page 64 Enter your e-mail address manually with the keyboard. Or select the e-mail address from the address book via the “Address Book/Folders” key, select with the “up” and “down” key and press the “OK” key. Enter or select CC and BCC address as well, if necessary.
  • Page 65 If user does not register this information on IMAGE SCANNER IS100e, it is impossible to use this system even if he owns account numbers and passwords of SMTP or POP3. After finishing scanning and conveying documents, if no more...
  • Page 66: Making Copy

    Making Copy BEFORE MAKING COPY Before making copy through the control panel, please do the following: Make sure that your printer supports PCL or Postscript printer language. Check if your printer has been properly connected to IMAGE SCANNER IS100e. Operation...
  • Page 67: Basic Operating Steps

    BASIC OPERATING STEPS To make simple copy, Place your document(s) either in the ADF or on the glass. Press the "Black&White" key to send your document(s) in black and white. Or press the "Full Color" key to send your document(s) in color.
  • Page 68: Accessing Copy Features

    ACCESSING COPY FEATURES You can access a variety of copy features before pressing the "Black&White" or "Full Color" keys. These features include: Changing Scaling Adjusting Density Choosing Copy Quality Choosing Paper Size Increasing Copy Count Focusing on Text/Photo/ Mixed Operation 6-10...
  • Page 69 CHANGING SCALING To reduce or enlarge the original document, 1. Press the “Copy” key on the panel to prompt the Copy screen. 2. Press the s key to enlarge your document in 1 percent increment. ‚ Or press the key to reduce your document in 1 percent decrement.
  • Page 70 ADJUSTING DENSITY IMAGE SCANNER IS100e is preset to the Normal level of density. If your original document comes with a lighter or darker contrast, you can improve the quality using the Adjusting Density feature. To change your density, 1. Press the “Copy” key on the panel to prompt the Copy screen.
  • Page 71 CHOOSING COPY QUALITY IMAGE SCANNER IS100e is preset to Fine copy quality, the setting suitable for most business document(s). If necessary, this setting can be changed to Super Fine copy quality. To choose your copy quality, Press the "Super Fine" key to enhance your copy quality.
  • Page 72 CHOOSING PAPER SIZE To change your input paper size, 1. Press the “Copy” key on the Control Panel to prompt the Copy screen. 2. Press the “down” key to scroll down to the A4/Letter/Legal field. 3. Choose your focus with the “left” key or the “right” keys. To change your preset output paper size, Your machine is preset to Letter size.
  • Page 73 4. Choose the paper size with the “left” key or the “right” key and press the “OK” key. INCREASING COPY COUNT IMAGE SCANNER IS100e is preset to 1 copy count. If you wish to increase the number of copies, choose your desired copy count with the numeric keypad or keyboard.
  • Page 74 FOCUSING ON PHOTO OR TEXT The machine is preset to auto mode. If required, you can change to photo or text if you wish to focus your copy result on photo or on text. To change your focus on photo or text, 4.
  • Page 75: Start Filing Document

    Start Filing Document WORK WITH THE CONTROL PANEL Place your document(s) face up in the ADF or face down on the glass. Press the "Filing" key. The LCD displays the Filing screen. File Prefix: MyImage Folder : My folder Password : ***** Post Proc.
  • Page 76 (A) After the filing operation screen appears, fill in the File Prefix on the first line. (B) The folder on the second line is the folder-setting file. If you want to add a new folder at this moment, press the "Address Book/Folders"...
  • Page 77 If the folder includes the same file name as yours, IMAGE SCANNER IS100e will ask you whether to replace the file in the folder. If you select “Replace All”, all the files will be replaced. If you select “Replace”, each file will be inquired.
  • Page 78 Operation 6-20...
  • Page 79: Troubleshooting

    10201 Z1 access error 10202 Z1 SRAM error Action Restart your IMAGE SCANNER IS100e. (Turn off and on again.) If the code still appears, contact your dealer. Restart your IMAGE SCANNER IS100e. If the code still appears, contact your dealer.
  • Page 80: Information Codes During Networking

    If the message still appears, contact your dealer. Action Ping the IP address of IMAGE SCANNER IS100e from another PC in DOS prompt. For example, type “Ping 10.1.20.144” in Dos prompt. If IMAGE SCANNER IS100e has no response, then perform the following steps.
  • Page 81: Information Codes During E-Mailing

    INFORMATION CODES DURING E-MAILING Info Meaning Code 30421 Service not available, 31421 closing transmission 32421 channel. The Server is going to shut down. 31450 Requested mail action not taken: mailbox unavailable 31451 Requested action 32451 aborted: local error in 33451 processing 31452 Requested action not...
  • Page 82 Info Meaning Code 30530 Authentication required: 31530 Mail server requires authentication in order to perform the requested action. 31550 Requested action not taken: mailbox unavailable [E.g., mailbox not found, no access] 31551 User not local: please try again. 31552 Requested mail action aborted: exceeded storage allocation 31553 Requested action not...
  • Page 83 Information Codes During Filing Info Meaning Code 41530 FTP password incorrect FTP Service not 41421 available 42421 43421 44421 42530 FTP login fail 43550 FTP can’t enter this directory 44450 FTP File unavailable 44452 FTP server storage insufficient 44553 FTP file action not taken.
  • Page 84 Info Code Meaning CIFS (User level) 50105 login fail CIFS (User level) 50167 No access right CIFS Server 50201 internal error CIFS (Share level) 50202 Bad password CIFS (Share level) 50204 Access password is read only. CIFS (Share level) 50206 Invalidate share name CIFS (User level)
  • Page 85 Contact server administrator to enable HTTP 1.1 PUT method This HTTP server does not support the transfer method of IMAGE SCANNER IS100e (chunked transfer-encoding). Contact server administrator to make sure server is running properly and try again. Contact server administrator to make sure server is running properly and try again.
  • Page 86 90505 AVPP Parsing 91000 error Troubleshooting Action That server does not support HTTP version 1.1 (IMAGE SCANNER IS100e uses), contact your system administrator for help. The application response is not compliance with AVPP spec. Contact developer to modify application. Page...
  • Page 87: Clearing A Paper Jam

    In the event of a paper jam, follow the procedures below to remove the paper: 1. Gently open the ADF front cover to the left. 2. Carefully pull the paper out of the ADF unit. 3. Close the ADF front cover. Your IMAGE SCANNER IS100e is now ready to use. Troubleshooting...
  • Page 88: Removing The Abnormal Line Image

    Removing the abnormal line image When the scanned image is with abnormal lines on it, clean the strip of glass area as indicated below. Clean this area. Troubleshooting 7-10...
  • Page 89: Cleaning The Adf

    From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case IMAGE SCANNER IS100e may not feed documents smoothly. If this occurs please follow the cleaning procedures to return your machine to its original state.
  • Page 90: Cleaning The Glass

    Dip a soft clean cloth with isopropyl alcohol (95%). Gently wipe the document glass and the white sheet beneath the document cover to remove the dust or any toner particles. Close the document cover. IMAGE SCANNER IS100e is now ready for use. Troubleshooting...
  • Page 91: Replacing The Snap-In Pad Module

    Replacing the Snap-in Pad Module After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended to replace the pad module with a new one.
  • Page 92 Assembling Procedure Take out the ADF pad module from the box. Press both arms of the ADF snap-in pad module inwardly with your two fingers Place it into the holes until it snaps into place. Troubleshooting 7-14...
  • Page 93: Appendix

    Appendix Quick Guide Placing Your Documents For multi-page transmission Place your document FACE UP in the ADF. For single-page transmission Place your documents FACE DOWN on the glass. Troubleshooting...
  • Page 94 Press the Copy key. Press the E-Mail key. Press the Filing key. Enter your copy count via the numeric keypad Enter an e-mail address with your keyboard. or press "Address Book/Folders" to select an e-mail address from the list. Press &...
  • Page 95: Specifications

    Specifications Items System Overview System Description Output Quality External Connections Internet Transmission Speed (ADF, Letter, B/W, Gray, Color) Copy Speed (ADF, A4, 300 dpi) Network Connection Networked Workgroup Solution for: Output Format Memory Size ADF Document Size ADF Document Weight/Thickness ADF Capacity Paper Feed Duty Cycle...
  • Page 96 Copy Output Format Speed for Local Copy Multiple Copies Copy Mode Enlarge / Reduce Network Spec Connectivity Communication Protocol Supported Browsers Configuration Requirement E-mail Spec Communication Protocol File Formats Compression Format Resolution Address Book Volume Filing Spec Communication Protocol File Formats Color Speed B/W Speed Resolution...

Table of Contents