Kenwood DNX892 Quick Start Manual page 48

SD card
1
DNX892/ DNX772BH
Press the <0> button for 1 second
to open the front panel.
0
NOTE
Functions of the Buttons on the
• For details, see
Front Panel (P.6).
2
Insert the card into the slot until
it clicks.
The unit loads the card and playback starts.
DNX692/ DNX572BH
● To remove:
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
NOTE
• A dummy micro SD card is inserted as the slot
cover. Remove it before using and keep it in an
appropriate place.
Return to the Top page
HDMI/ MHL source
You can display the screen of smartphones
connected via the HDMI/MHL input terminal.
1
Press the <HOME> button.
2
Touch [HDMI/ MHL] in the HOME
screen. (P.16)
3
Start an application or playback
on your smartphone.
● About Miracast Dongles:
This unit is compatible with Miracast
Dongles. Connecting a Miracast Dongle
(KCA-WL100: optional accessory) to the
HDMI/MHL input terminal enables you
to enjoy listening to music, watching
videos, or viewing pictures over a wireless
connection.
NOTE
• For details about Miracast Dongle settings, etc.,
refer to the instructions supplied with the Miracast
Dongle.
Basic Operations
15