Note: Follow the disassembly procedure in the numerical order given.
3-1. LOADING PANEL
1 Turn ON the power, and press the EJECT button to open the
tray.
2 Remove the loading panel in the arrow direction.
3 Press the EJECT button to close the tray.
• If the power cannot be turned ON, refer to "Opening the Disc
Tray When the Power is OFF" of "Service Note", and open the
tray.
Loading panel
3-2. GLASS ASSY
SECTION 3
DISASSEMBLY
Power button
4
3
4
1 Screw (PTP2.6x6)
2 Bracket (shaft)
(Bottom side)
– 8 –
Eject button