Sony 1/3" DSP COLOR CAMERA Instruction Manual page 16

2. Attach the DC-type auto iris lens to the lens mount on the front of the
camera.
3. Plug the connector into the auto iris jack on the back of the camera. The
connector is polarized and can only be inserted into the jack one way.
4. The E/I switch should be in the " OFF" position.
5. The A/I switch should be in the " DC" position.
6. Apply power to the camera.
7. Adjust the auto iris lens for an optimum picture using the LEVEL control on
the back of the camera.
10
PIN NAME
1 Damp Coil -
2 Damp Coil +
3 Drive Coil +
4 Drive Coil -
WIRE COLOR
Blue
Red
White
Green
BACK VIEW