Adjusting The Equalizer (Eq Menu); Settings For The Surround Sound (Sur Menu) - Sony STR-DH700 Operating Instructions Manual

Adjusting the equalizer
(EO menu)
You can use the EQ menu to adjust the tonal
quality (bass/treble level) of the front
speakers.
Select "2-EQ" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 40) and
"Overview of the menus" (page 41).
EQ menu parameters
• EQ (Equalizer on/off)
Lets you tum the equalizer on or off.
• EQ OFF
The equalizer is turned off.
• EQON
The equalizer is turned on.
• BASS LVL (Front speaker bass
level)
• TRE LVL (Front speaker treble
level)
Notes
• This function does not work for signals with a
sampling frequency of more than 48 kHz.
• If you adjust the equalizer during DTS 96/24 signal
reception, the signal will be output only at 48 kHz.
46 US
Settings for the surround
sound
(SUR menu)
You can use the SDR menu to select the sound
field you want for your listening pleasure.
Select "3-SUR" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 40) and
"Overview of the menus" (page 41).
SUR menu parameters
• S.F. SELCT (Sound field
selection)
Lets you select the sound field you want. For
details, see "Enjoying Surround Sound" (page
56).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select "HALL" for the
DVD input, then change to a different input and then
return to DVD, "HALL" will automatically be
applied again.
• SB DEC (Surround back
decoding mode)
Lets you select the surround back decoding
mode. For details, see "Using the surround
back decoding mode (SB DEC)" (page 47).
• EFFECT (Effect level)
Lets you adjust the "presence" of the surround
effect for sound fields selected with the
MOVIE or MUSIC buttons.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maximum.