Disconnecting The Ic Recorder From The Ac Outlet - Sony ICD-AX412F Operating Instructions Manual

Disconnecting the IC
recorder from the AC outlet
Follow the procedures below; otherwise,
when the IC recorder contains data files, the
files may be damaged or become
unplayable.
1
If you are recording or playing back a
file, press (stop) to put the IC recorder
x
into the stop mode.
2
Make sure that the access, recording, and
playback indicators of the IC recorder do
not light.
3
Disconnect the USB connecting cable
from the (USB) connector of the IC
recorder, then disconnect the USB AC
adaptor from the USB connecting cable,
and then disconnect the USB AC adaptor
from the AC outlet.
P Notes
• During recording (the recording indicator
lights or flashes in red) or accessing data (the
access indicator flashes in orange),
– the IC recorder should not be connected to
or disconnected from the USB AC adaptor
connected to the AC outlet.
– the USB AC adaptor connected to the IC
recorder should not be connected to or
disconnected from the AC outlet.
Doing so may damage the data. If the IC
recorder is required to process a large
amount of data, the start-up window may be
displayed for an extended period of time.
This is not a malfunction of the IC recorder.
Wait until the start-up display disappears
from the display window.
• While a USB AC adaptor is being used, the
battery indicator does not appear in the
display window.
• You cannot charge batteries during the FM
reception.
111 GB