Port Forwarding - D-Link DSL-2730U User Manual

DSL-2730U User Manual
Field
Generate PIN
PIN Station
WPS Session
Status
3.3.2

Port Forwarding

This function is used to open ports in your device and re-direct data through
those ports to a single PC on your network (WAN-to-LAN traffic). It allows remote
users to access services on your LAN, such as FTP for file transfers or SMTP
and POP3 for e-mail. The device accepts remote requests for these services at
your global IP address. It uses the specified TCP or UDP protocol and port
number, and redirects these requests to the server on your LAN with the LAN IP
address you specify. Note that the specified private IP address must be within the
available range of the subnet where the device is in.
Choose ADVANCED > Port Forwarding. The page shown in the following figure
appears.
Click Add to add a virtual server.
Press the button to generate a pin used by the AP
and the station.
Press the button to connect the station with the pin.
Display the session status.
34
Description