Table of Contents
Advertisement
Sounds for 5 seconds are
buffered in the memory.
z REC/PAUSE
Press
to enter the recording
standby mode.
1
Select the
녹음
" in the menu, and then press
ENT.
2
Press
or
v
V
켬
select "
," and then press
사전 녹음
"
" is set to "
purchase the IC recorder.
3
Press
x
STOP to exit the menu mode.
4
Select a folder.
5
Press and hold
44
GB
z REC/
Press
PAUSE.
Recording
starts.
(Recording) tab t "
on the control button to
/ENT.
N
끔
" when you
REC/PAUSE.
z
The IC recorder enters the recording
standby mode.
Pre-recording starts and sounds for a
maximum of the last 5 seconds are
buffered in the memory.
사전
/
N
6
To start recording, press
PAUSE.
The standby for recording mode is
released, and recording continues from
the sound buffered in step 5.
7
To stop recording, press
P Notes
• If you start recording with pre-recording
function using the built-in microphones, a
click noise may be recorded when you press
z REC/PAUSE. To record with
pre-recording function, we recommend
using an external microphone.
• When the remaining recordable time is less
than 10 seconds, the pre-recording function
is disabled. Before starting to use the
pre-recording function, erase unwanted files.
Displays how long the
sound is buffered in the
memory.
REC/
z
STOP.
x
Advertisement
Table of Contents
