Quick Select Function; Various Memory Functions - Denon AVR-591 Owner's Manual

ENGLISH
Convenient functions

Quick select function

All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 19)
w Volume (vpage 19)
e Surround mode (vpage 23)
r Video Select (vpage 39)
t Audyssey Setting
(MultEQ ® , Dynamic EQ ® , Dynamic
Volume™) (vpage 43)
2
Press and hold the desired QUICK SELECT until
"Memory" appears on the display.
The current settings will be memorized.
GQuick Select DefaultsH
Input Source
QUICK SELECT 1 BD
QUICK SELECT 2 SAT/CBL
QUICK SELECT 3 DOCK
n Recalling the settings
Press QUICK SELECT at which the
settings you want to call out are saved.
The , or indicator illuminates on
the display.
Naming quick select settings
See "Quick Select Name" (vpage 50).
32
QUICK SELECT
If on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at "Source Delete" (vpage 49). In this case,
store them again.

Various memory functions

n Personal memory plus function
This function sets the settings (input mode, surround mode, HDMI
output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay
etc.) last selected for the individual input sources.
Volume
–40 dB
The surround parameters, tone settings and the volumes of the
–40 dB
different speakers are stored for the individual surround modes.
–40 dB
n Last function memory
This function stores the settings which were made before going
into the standby mode.
When the power is turned back on, the settings are restored.