Power connector - This unit is equipped with a single 2 pole power connector, mounted at the rear of the CoData for low voltage power input. Do not attempt to alter this connector in any way.
Page 4
Standards and the Health and Safety at Work Act should be observed. WARNING TO PREVENT DANGER OF FIRE OR SHOCK, DO NOT EXPOSE THE INTERNAL COMPONENTS OF THIS EQUIPMENT TO RAIN OR MOISTURE. CODATA Installation Manual V2 - OCT 12.doc - 4 -...
2. INTRODUCTION GENERAL The Omnivision CODATA transceivers offer a cost sensitive solution to the reuse coaxial cables in your existing building structures as the transport medium for Ethernet data; camera or switch data. The Omnivision CODATA transceiver modules offer a full duplex connection with data rates of up to 130MBits/s over distances of 500m.
LINK: Communication successfully established between local and remote device Temperature 32°F (0°C) to 122°F (50°C) operating range: -13°F (-25°C) to 158°F (70°C) non-operating and storage 10% to 90% (non-condensing) operating CODATA Installation Manual V2 - OCT 12.doc - 6 -...
The Mounting Plate is to be used with a number of products within the Omnivision family. The mounting plate is designed to provide simple installation; it will allow the mounting of the Omnivision CoData to a hard surface or rack shelving.
Page 12
Other Products in the Range The BBV Omnivision Decoder is a standalone unit, which The BBV Omnivision ViewPoint keyboard is a unique camera control facilitates the streaming of camera images from one or more system with an inbuilt video decoder for intuitive control of IP cameras.