Menu Tree - GiiNii GD-250 User Manual

4.2 Menu Tree

Refer to the below table for details on menu items and available menu options.
Menu option
Resolution
Loop recording
WDR
Exposure
Motion Detection
Record Audio
Date Stamp
G-sensor
Date/Time
Key Tone
Language
AV Out
Frequency
Screen Saver
Format
Default Setting
Firmware version
-
Description
Set the desired video resolution.
2 Minute to 5 Minute
Wide Dynamic Range
+2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0,
-1/3, -2/3, -1.0, -4/3, -5/3, -2.0
Enable/Disable the motion detection. If this
function is enabled and the power off
button is pressed, the system alert message.
Under motion detection mode, the device
will automatically start recording when any
object movement is detected.
Recording with audio
Recording with date
Adjust G-sensor sensitivity
Set the date/time
Button Key Sound
Set up language
Set up AV Out mode
Adjust light frequency
Set up
Screen Saver
Format the memory card. Warning: Once a
format has been initiated, ALL content on the
micro SD card will be deleted CANNOT be
restored or recovered.
Reset all options to the factory default
settings.
Showing firmware version
Available option
1080FHD
720P 60FPS
720P 30FPS
WVGA
VGA
Off/2 Minute, 3Minute or 5 Minute
ON
On/Off
On/Off
On/Off
Off/High/Middle/Low
Press
value, press the REC button to
switch
the field and confirm.
OFF/NO
English, French, Spanish, Portuguese,
Deutsch, Italian, Simplified Chinese,
Traditional Chinese, Russia, Japanese
PAL/NTSC
50Hz/60Hz
Off/3 Minute, 5 Minute or 10Minute
OK/Cancel
OK/Cancel
17
/
button to adjust the