Other Connections; Network Connection; Satellite Dish Connection; Euro Scart Connection - LG 49UF675V Owner's Manual

Uhd tv
Hide thumbs Also See for 49UF675V:
Table of Contents

Advertisement

Satellite dish connection

(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω).
HDMI ULTRA HD deep colour
settings
(Only UF67**)
•  SETTINGS
PICTURE
HDMI ULTRA HD Deep Colour
HDMI (1/2) ULTRA HD Deep Colour
- On : Support 4 K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off : Support 4 K @ 50/60 Hz (4:2:0)
•  All HDMI ports support the HDCP 2.2.
•  4 K Source is only supported in HDMI input.
•  4 K signal and content are not available in the RF/USB input.
•  All HDMI input ports support 4 K @ 50/60 Hz (For details on the
supported specifications, refer to the table below.) for high-
definition video. Picture or sound may not be supported depending
on the specifications of the external device connected. In that case,
change the settings for HDMI ULTRA HD Deep Colour.
4 K @ 50/60 Hz Support Format
Frame rate
Resolution
(Hz)
YCbCr 4:2:0
50.00
3840 x 2160p
59.94
4096 x 2160p
YCbCr 4:4:4
60.00
RGB 4:4:4
1 : Only supported when HDMI ULTRA HD Deep Colour turned "On".

CI module connection

(Depending on model)
View the encrypted (pay) services in digital TV mode.
•  Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
•  If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

Euro Scart connection

(Depending on model)
Transmits the video and audio signals from an external device to the
TV set. Connect the external device and the TV set with the euro scart
cable.
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
•  Any Euro scart cable used must be signal shielded.
•  When watching digital TV in 3D imaging mode, only 2D out signals

Other connections

Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Colour Depth /
Some separate cable is not provided.
Chroma Sampling
8 bit
10 bit
12 bit

Network connection

YCbCr 4:2:0
1
(Only LAN PORT model)
YCbCr 4:2:2
1
Image shown may differ from your TV.
-
-
1

Wired network connection

-
-
1
Output
Type
can be output through the SCART cable. (Only 3D models)
Internet connection
Wired router
AV1
(TV Out
)
1
Digital TV
Analogue TV
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfl68702411

Table of Contents