Connecting A Vcr - Samsung 650 User Manual

6 series
Hide thumbs Also See for 650:
Table of Contents

Advertisement

Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according
to the instructions on pages
9-10).
Skip step
1
if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or antenna
from the back of the TV
2
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3
Connect an Antenna Cable
between the ANT OUT
terminal on the VCR and the
ANT IN terminal on the TV
4
Connect a Video Cable
between the VIDEO OUT
jack on the VCR and the AV
IN
1
[YIVIDEO] or AV IN
2
[VIDEO] jack on the TV.
5
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 1 (or AV IN 2) [R-AUDIO-L]
jacks on the TV
TV Rear Panel
VCR Rear Panel
1 Audio Cable (Not supplied)
----~~------_
.
o
Video Cable (Not supplied)
TV Side Panel
·
'.
. .
. ·.
· .
·
. ·. ·.
·. ·.
·
. ·. ·
.
:
.
.
....
...
.. ...
:
.
..•............
W
Antenna cable (Not supplied)
~
If you have a "mono" (non-stereo) VCR, use a Y-connector (not supplied) to
connect to the right and left audio input jacks of the TV Alternatively, connect the
cable to the "R" jack.
If your VCR is stereo, you must connect two cables.
~
Each VCR has a different back panel configuration.
~
When connecting a VCR, match the color of the connection terminal to the cable.
~
When connecting to AV IN 1, the color of the AV IN 1 [YIVIDEO] jack (Green) does
not match the color of the video cable (Yellow).
~
ill
m,
""'"
~I
TV Side Panel
TV Rear Panel
W
Audio Cable (No! supplied)
CD
Antenna cable(Not supplied)
o
S·Video Cable(No! supplied)
VCR Rear Panel
3
Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the AV
IN 2 [R-AUDIO-L] jacks on
the TV
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1
To begin, follow steps
1-3
in the previous section to
connect the antenna or cable
to your VCR and your TV
2
Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the AV
IN 2 [S-VIDEO] jack on the
TV
An S-Video cable may be included with your VCR. (If not, check your local electronics
store.)
~
Each VCR has a different back panel configuration.
~
When connecting a VCR, match the color of the connection terminal to the cable.
English _13'
c
<

Advertisement

Table of Contents
loading

Table of Contents