Easy-Pack Rear Sill Protector - Mercedes-Benz E-Class Operator's Manual

To open: open the tailgate.
X
Holding the ribbing, press handle : down-
X
wards ;.
Handle : folds upwards.
Pull EASY-PACK folding luggage-compart-
X
ment floor = in the direction of the arrow
by handle : until it reaches the desired
position and engages in side ?.
To close: disengage the EASY-PACK fold-
X
ing luggage-compartment floor and pull it
back.
Press the EASY-PACK folding luggage-com-
X
partment floor down ; until it engages.
Installing and removing the folding
cargo compartment floor
120° position
Remove the combined cargo cover and net
X
( page 301).
Y
To remove: move EASY-PACK folding lug-
X
gage-compartment floor : into the 120°
position and lift it upwards.
To install: push EASY-PACK folding lug-
X
gage-compartment floor : to the stop,
move it into the 120° position and make
sure it engages audibly.
Pull EASY-PACK folding luggage-compart-
X
ment floor : forwards.

EASY-PACK rear sill protector

(Wagon)
! Before closing the tailgate, refasten the
EASY-PACK rear sill protector on the under-
side of the EASY-PACK folding luggage-
compartment floor.
The EASY-PACK rear sill protector could
otherwise be damaged.
The EASY-PACK rear sill protector is attached
to the underside of the EASY-PACK folding
cargo compartment floor by means of mag-
nets. It is designed to prevent clothing
becoming stained and the paintwork being
scratched when loading.
Open the EASY-PACK folding luggage-com-
X
partment floor ( page 306).
Y
Use tab ; to detach EASY-PACK rear sill
X
protector : from the magnets and place it
over the loading sill.
Close the EASY-PACK folding cargo com-
X
partment floor.
Stowage areas
Z
307