Table of Contents
Advertisement
SERVICE MANUAL
Model: HFD647AS/HB21TSSAA
3-1-2.Freezer door handle
1. Retrieve the handle clearly marked for the Freezer Door that needs attachment.
2. Insert the Handle Con necting Screws into the holes provide d on the Freezer Doo r. Using a hand
held screwdriver tighten the Handl e Connecting Screw until the screw thread s disappear and the
first flat surface of the Handle Connecting Screw touches the Freezer Drawer surface (as shown in
illustration1- step2). Do not over tighten-damage to the door can occur.
3. Place the Freezer Drawer Ha ndle onto the Handle Connecting Screws (as shown in illustration1
–step3).The Freezer Drawer Handle should rest comfortably on these Connecting Screws.
4. Insert the Connecting Bolt in to the holes on the bottom of the Freezer Drawer Handle marked
"Left". Using the provided Hex Driver and tighten until the handle is fixed firmly to the door. Repeat
this process for the "Right" side of the Freezer Drawer Handle (as shown in illustration 2-step4).Be
careful when tightening not to scratch the door surface.
5. To disassemble the Refrigeration Door Handle, follow these directions in reverse.
11
Hide quick links:
Advertisement
Table of Contents
