Installing The Software - Sony PEGA-SA10 Operating Instructions Manual

Installing the Software

To play back MP3-format audio files and movies with audio on
your CLIÉ handheld using the Audio Adapter, you must first
install Audio Player for Adapter and the required system software
onto your CLIÉ handheld from the supplied CD-ROM. You must
also install RealJukebox for Sony onto your computer from the
CD-ROM.
Notes
• Never install Audio Player for Adapter supplied with this adapter to
a CLIÉ handheld with audio playback capabilities*. Installation of
such software will cause the CLIÉ handheld to malfunction.
• The Audio Adapter provides playback of MP3-format audio data
and gMovie audio sound only. Please note that it does not support
ATRAC3-format data, for which MagicGate Memory Stick media is
required.
• Be sure the cradle or the USB cable is attached to your CLIÉ
handheld and connect the CLIÉ handheld to your computer for
HotSync ® operation before installing the software. For information
on connecting the cradle or the USB cable to your computer and
HotSync operation, see the manual that came with your CLIÉ
handheld.
• Installation requires a CD-ROM drive. If your computer does not
have an internal CD-ROM drive, be sure to provide CD-ROM access
for your computer before performing the following procedure. For
information on how to use CD-ROMs, see the printed or online
manual for your computer or CD-ROM drive.
* PEG-N710C, PEG-750C, PEG-N760C (as of September 2001)
8
US04INS-U.p65 8-9
PEGA-SA10 3-659-902-11(1).US
1
Insert the supplied CD-ROM into the CD-ROM drive on
your computer.
The installer software starts up and the Installation Menu
screen appears.
z
If the installer software does not start up automatically,
open the CD-ROM window and double-click the "Setup"
icon (Setup.exe).
2
Click "Install Audio Adapter system files."
3
When the screen that ends the installation appears,
click [Finish].
Your computer is now ready for installing the software for
Audio Adapter. The Installation Menu screen appears on the
display monitor of your computer. Install RealJukebox for
Sony, PictureGear, etc. to your computer.
4
Click "Install RealJukebox2 Basic for Sony."
Follow the on-screen instructions to proceed.
5
Click "Install image and movie software...."
Follow the on-screen instructions to install PictureGear Lite,
QuickTime, DirectX 6 and gMovie sample files.
Installation onto your computer is now complete. Continue by
installing the software applications which are prepared as
shown in 1 to 4.
6
Perform a software reset on your CLIÉ handheld.
For information on performing a software reset, see the
manual that came with your CLIÉ handheld.
7
With the cradle or USB cable attached to the CLIÉ
handheld, connect the CLIÉ handheld to your
computer.
8
Activate the local HotSync function on your CLIÉ
handheld.
Press the button on the front of the cradle or tap
home screen on your CLIÉ handheld. The local HotSync
function is activated and softwares for the Audio Adapter that
are set on
9/28/01, 10:01
PEGA-SA10 3-659-902-11(1).US
in the
9