Table of Contents
Advertisement
NetWare 4.x
Directory Services Configuration
Bindery vs. NDS Setup
In addition to its native NDS (NetWare Directory Services), NetWare 4.x can also be
used in Bindery emulation. Bindery emulation is provided on the 1000E for users
more familiar with the NetWare Bindery than with NDS. If Bindery emulation is
preferred, please refer to the NetWare section of the 1000E Instruction Handbook.
PCONSOLE vs. NWADMIN Setup
NetWare 4.x setup can be done with either PCONSOLE or NWADMIN. This Quick
Configuration Guide includes the procedures in PCONSOLE because fewer steps
are required than with NWADMIN. If setup with NWADMIN is preferred, please refer
to the NetWare section of the 1000E Instruction Handbook.
Configuration Utilities
This configuration is accomplished using two utilities, NetWare's PCONSOLE, and
the Windows-based Management Access Program (MAP) included with the 1000E.
PCONSOLE Configuration
1. Enter PCONSOLE.
2. Set the Current "Context".
Context is the NetWare term for a specific location in the Directory Services tree.
The current context is displayed in the upper left hand corner of the screen. This
is where the Print Server, Printer, and Queue will be located. If this is not the
desired context for these objects, use the following procedure to change the
current context.
Select Change Context from the PCONSOLE main menu.
Press
INSERT
Highlight the desired context and press F10.
Once in the desired context, make a note of it as displayed in the upper left hand
corner of the screen. This context will need to be entered during the configura-
tion with the Management Access Program.
Print Server Context: _______________________________
to browse to the desired context.
1
Advertisement
Table of Contents
