GMSK-modulated or 8-PSK-modulated signal to RF. [Figure 1-1] Block diagram of RF part A generic, high-level functional block diagram of GM750 is shown in Figure 1-1. One antenna collects base station forward link signals and radiates handset reverse link signals. The antenna connects with receive and transmit paths through a SKY77521 (FEM, Front End Module + GSM PAM).
2. The amplitude-modulated (AM) component is applied to the ramping control pin of Polar power amplifier from a DAC within the MSM GM750 power supply voltages are managed and regulated by the PM7540 Power Management IC. This versatile device integrates all wireless handset power management, general housekeeping, and user interface support functions into a single mixed signal IC.
3. Technical Brief 3.12.4. Touch Interface In GM750, 4-wire touch screen panel is used for user input method. Two resistive layers make up a 4-wire touch screen panel and are separated by insulating dots. The inside surface of each layer is coated with a transparent metal oxide coating that generates a gradient across each layer when voltage is applied.