Setting The Date And Time; Turning Power Save On Or Off - Insignia NS-DSC1112 User Manual

Setting the date and time

Note
• The date and time can only be set when Simple
mode is set to Off.
To set the date and time:
1 Turn on your camera.
2 Slide the MODE switch to switch to Photo
Video mode.
3 Press MENU. The on-screen menu opens.
4 Press / or / to select the
The Setup menu opens.
5 Press / or
then press / or OK/DISP to open the date
and time screen.
6 Press / or
/ to move to the minutes field.
Tip
You can press and hold a navigation button to
change the values continuously.
7 Repeat Step 4 to set the minutes, select AM or
PM, and enter the year, month, and day.
Note
If the batteries are removed for longer than 48 hours,
the date and time must be reset.
8 Press MENU to close the menu.
22
NS-DSC1112/NS-DSC1112P/NS-DSC1112-CN Insignia 12 Megapixel Camera
(setup) tab.
/ to highlight Date & Time,
/ to set the hour, then press
www.insigniaproducts.com

Turning Power Save on or off

Note
The power save function can only be accessed when
Simple mode is set to Off.
The Power Save function automatically turns off
your camera after being idle for a specified period
of time to save power.
or
This function is turned off when:
• Recording and playing a video
• Erasing or copying files
• Using the USB connector
Caution
Connecting your camera to a computer using the
USB connector will not recharge your camera's
batteries or enhance battery life. Make sure that you
disconnect your camera from the computer and
power down your camera when you are finished
transferring files to your computer.
To turn Power Save on or off:
1 Turn on your camera.
2 Slide the MODE switch to switch to Photo
Video
3 Press MENU. The on-screen menu opens.
4 Press
The Setup menu opens.
5 Press
then press / or OK/DISP to open the
submenu.
6 Press
press OK/DISP.
7 Press MENU to close the menu.
mode.
/ or / to select the
/ or / to highlight Power Save,
/ or / to select On or Off, then
or
(setup) tab.