Calling using voice tags
1. Make sure there is a voice tag recorded for the person you want to call. If
there isn't, see "Recording voice tags" on page 76.
2. From the home screen, press
3. Say the name of the person you want to call.
4. If the name you said matches a contact in the Voice Dial List, the phone
responds: "Calling (Name)." Remain silent to make the call, or say
to cancel.
Note: If there are multiple names saved in the Voice Dial List that match the
name you said, you will be asked to verify which name you want to call.
Say
incorrect name.
5. When you are finished, press
command.
Note: You can set the phone to prompt you to "say a name" as soon as you
open the flip:
•
Select
User Guide for the Kyocera S14 Opal phone
when you hear the correct name. Say
→
→
. The phone responds: "Say a name."
. You cannot end the call with a voice
→
when you hear an
→
79