Waking up the phone
If your phone is connected to a portable hands-
free car kit, you can use a voice command to
activate the phone to make a call.
Note:
Voice Wake-up does not work with
Keygaurd active. To disable Keygaurd, see
"Locking your phone" on page 34.
To activate the Voice Wake-up setting:
→
Menu
Settings
• Select
→
Voice Features
With accessory
.
To wake up the phone:
1.
Wake Up
Say
and listen for a tone.
2.
Wake Up
Say
again until you hear two tones.
If the phone does not recognize your "Wake up"
command, see "Training voice recognition" on
page 40.
Answering the phone
You can set the portable hands-free car kit to
either (1) answer automatically or (2) answer
using a voice command.
Answering automatically
→
Menu
Settings
• Select
→
Auto-Answer
After 5 seconds
Note:
This setting also works with the portable
hands-free car kit.
User Guide for the Kyocera KX9e Phone
→
→
Voice Wake-Up
→
Accessories
.
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed Kyocera hands-free car kit.
To turn off Auto-Answer:
Menu
• Select
Auto-Answer
To activate the Voice Answer setting:
1.
Menu
Select
Voice Features
2.
Menu
Select
Normal Sounds
To answer a call:
When you receive an incoming call, the phone
responds: "Incoming call, answer?" or "Incoming
roam call, answer?" If the caller is recognized as a
saved contact entry, then the phone says
"Incoming call from (Name), answer?"
Yes
• Say
or press any key except
Ignoring an incoming call
To ignore an incoming call, do one of the
following:
No
• Say
and press
→
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
→
→
Settings
Accessories
→
Disabled
.
→
→
Settings
→
→
Voice Answer
→
→
Settings
Silent Mode
.
to silence the alert.
→
Enabled
.
→
.
39