Roaming Calls - Kyocera K122 User Manual

When no svc
–
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
Roam Change
–
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
Any Change
– alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
→
1. Menu Settings
Select
Roam Ringer
.
2. Enabled
Highlight
3.
Press to set.
Setting Call Guard to avoid

roaming calls

You can set the phone to warn you before you
answer or place a call while roaming.
→
Menu Settings
• Select
→
Call Guard Call prompt
– The phone now emits a distinctive roam
alert to indicate when you are roaming
during calls.
User Guide for the Kyocera K122 Phone
alerts you with three tones
alerts you with two
→ →
Sounds
to hear the ringer.
→
Convenience
.
– To accept or place a call while roaming,
you must press
Note:
This functionality is disabled when the
phone is in emergency mode.
Turning roaming on or off
This setting allows you to control the phone's
roaming feature by specifying which signals the
phone will accept.
1. Menu
Select
Roam Option
2.
Select an option and press
Automatic
–
accepts any system the phone
service provides.
No roaming
–
or receiving calls outside of your home
service area.
Note:
If your phone has more than one setting for
Automatic, contact your service provider to
determine which one to use.
→
.
→ →
Settings Network
.
.
(recommended setting)
prevents you from making
→
11