Camera Control Panel - Sony SNC-CH160 User Manual

Frame rate
(Displayed only when the camera image is in JPEG.)
Selects the frame rate to transmit images.
(Capture)
Click to capture a still image shot by the camera and to
store it in the computer. Click
saved.
Note
In the case of Windows VISTA or Windows 7, if
"Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, still images cannot be
shot.
(Run)/ (Stop Save Video)
Runs and stops Save Video. Click
to be saved.
Note
In the case of Windows VISTA or Windows 7, if
"Enable Protected Mode" is checked in Control
Panel-Internet Option-Security, video content cannot be
saved.

Camera control panel

The camera control panel appears when SolidPTZ is set
to On. This panel allows you to control the camera's
pan/tilt/home position and zoom (page 25). In addition,
you can obtain authority to operate the camera in
exclusive control mode.
Image action
Select the mode of operation from Off, Area zoom and
Vector dragging.
Pan/Tilt control
Click the arrow button the direction in which you want
to move the camera. Keep it pressed to move the camera
continuously.
To return to the home position, click
22
Configuration of Main Viewer
to open the folder to be
to open the folder
.
Zoom control
Press to zoom out, and press
Zooming continues while the button remains pressed.
Exclusive control
Click this button to display the time remaining for
operation authority. However, if operation authority has
not been obtained, the waiting time is displayed.
Note
Set the Exclusive control mode in the System Tab of the
System Menu to On to perform exclusive control
(page 34).
Panorama panel
If you click on the Panorama panel, the image of that
place is displayed on the monitor.
Trigger panel
The above is displayed only when Viewer mode
(page 63) is set to Full, and one or more triggers are
enabled in the Trigger menu (page 75).
The configured functions are displayed as buttons on
this panel.
Click the function button you want to use on the Trigger
panel. The selected function is activated. The selectable
functions are as follows:
• send still image files attached to an e-mail (page 27)
• send still image files to an FTP server (page 27)
• control the alarm output (page 27)
• switch the Day/Night function on/off (page 27)
to zoom in.