Water Leak Under Unit; Water In Ice Bin; Water Will Not Stop Filling; Unit Noisy - Electrolux Ice Maker Service Manual

Problem

17. Water leak under unit.

Cause

18. Water in ice bin.

Cause

19. Water will not stop filling.

Cause

20. Unit noisy.

Cause
Cause
a. Incoming water supply line
leaking.
b. Fill tube leaking.
a. Bin drain kinked or restricted.
b. External drain is restricted.
c. Bad pump.
a. Water solenoid stuck in open
position.
b. Open relay on control board.
NOTE: A defective relay on
control board would
cause both the water
valve and reversing
valve to stay open,
therefore, this failure
would not allow the unit
to freeze.
a. Fan motor not secured to
bracket.
b. Fan blade bent.
c. Vibration from refrigerant lines.
d. Obstruction in fan blade.
26
Correction
a. Make sure brass connection is
screwed tight to valve and
threaded correctly.
b. Tighten fill tube connection to
water line.
c. Unit not repairable. Contact
Electrolux tech line for
assistance.
Remedy
a. Clear drain of obstruction or kink.
b. Clear restriction.
c. Replace pump.
Remedy
a. Replace water valve.
b. Replace control board.
Remedy
a. Tighten motor.
b. Realign or replace blade.
c. Secure tubing.
d. Remove obstruction.